Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM F1476-07(2013) 1.10.2013 náhľad

Doplňujúce informácie

ASTM F1476-07(2013)

Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

Automaticky preložený názov:

Štandard Specification pre výkon utesnené mechanických spojovacích zariadení pre použitie v Potrubné Aplikácie

NORMA vydaná dňa 1.10.2013

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 74.40 € Tlačené - 74.40 €
Dostupnosť	SKLADOM
Cena	74.40 € bez DPH
74.40 €

Informácie o norme:

Označenie normy: ASTM F1476-07(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2013
Kód tovaru: NS-50435
Počet strán: 18
Približná hmotnosť: 54 g (0.12 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Příruby, spojky a spojovací části

Anotácia textu normy ASTM F1476-07(2013) :

Keywords:
coupling, flexible, gasketed, grooved, plain end, rigid, ICS Number Code 23.040.60 (Flanges, couplings and joints)

Doplňujúce informácie

1. Scope

1.1 This specification provides the performance characteristics and qualification tests required for gasketed mechanical couplings including grooved-type mechanical couplings for grooved end pipe, mechanical restraint couplings for plain end pipe and mechanical compression couplings for plain end pipe. These couplings are for use at temperatures within the recommended temperature range of their respective gaskets. Consult manufacturer for details.

1.2 The values stated in metric units (SI) are to be regarded as the standard. The values given in parentheses (inch/pound) are provided for information purposes.

1.3 Measuring and test equipment (M&TE) used in the performance of the tests described herein shall be calibrated using equipment which is traceable to the National Institute of Standards and Technology (NIST) or calibrated in accordance with the requirements detailed in BS 5781 Part 1 against standards traceable to National Standards.

1.4 As this is not a dimensional standard, nor does it contain component dimensions, the intermixing of sub-components such as gaskets and housings between manufacturers is not recommended and constitutes non-conformance with this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

B88-22	Standard Specification for Seamless Copper Water Tube
B580-79(2019)	Standard Specification for Anodic Oxide Coatings on Aluminum
A536-84(2019)e1	Standard Specification for Ductile Iron Castings (Includes all amendments and changes 5/3/2019).
A743/A743M-21	Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A183-14(2020)	Standard Specification for Carbon Steel Track Bolts and Nuts
A395/A395M-99(2022)	Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A325-14	Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)
A194/A194M-23	Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A193/A193M-23	Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A563-15	Standard Specification for Carbon and Alloy Steel Nuts
B26/B26M-18e1	Standard Specification for Aluminum-Alloy Sand Castings (Includes all amendments and changes 4/2/2021).
D2000-18	Standard Classification System for Rubber Products in Automotive Applications
A153/A153M-23	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
F837-20	Standard Specification for Stainless Steel Socket Head Cap Screws
B633-23	Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
A574-21	Standard Specification for Alloy Steel Socket-Head Cap Screws
A47/A47M-99(2022)e1	Standard Specification for Ferritic Malleable Iron Castings (Includes all amendments and changes 10/7/2022).
A53/A53M-24	Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A135-05	Standard Specification for Electric-Resistance-Welded Steel Pipe

Podobné normy:

ASTM F1122-04(2010)..

Historická
1.3.2010

ASTM F1123-87(2010)..

Historická
1.3.2010

ASTM F1311-90(2012)..

Historická
1.5.2012

ASTM F1429-99(2009)..

Historická
1.8.2009

ASTM F1986-01(2011)..

Historická
1.8.2011

ASTM F1987-01(2011)..

Historická
1.8.2011

Odporúčame:

EviZak - všetky zákony vrátane ich evidencie na jednom mieste

Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !

Chcete vedieť viac informácii ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.