Standard Practice for Labeling Chemical Protective Clothing
NORMA vydaná dňa 1.1.2018
Označenie normy: ASTM F1301-18
Dátum vydania normy: 1.1.2018
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
chemical protective clothing, labeling, protective clothing ,, ICS Number Code 13.340.10 (Protective clothing)
|Significance and Use|
3.1 This practice contains the recommendations for minimal informational requirements for the identification of chemical protective clothing items. It is intended to provide the user with some of the basic information necessary for the proper selection and use of the chemical protective clothing.
3.2 For some items of chemical protective clothing, such as disposable chemical protective gloves, it is recognized that it is not practical that the labeling information be provided directly on the product. Therefore, it is permissible that this information be provided on the direct packaging that contains the product. As an example, it is possible to put the recommended product information on the dispenser box that contains multiple pairs of disposable chemical protective gloves.
3.3 Additional information beyond the content recommended by this practice is permitted to be applied to the label. This additional label content can include statements indicating compliance with specific standards, warnings, limitations associated with the product, and certain types of use, care, and maintenance information as addressed in Practice .
3.4 Rules and regulations in Title 16 Code of Federal Regulations Part 303 cover the identification of fibers in textile products, specifically the disclosure of the fiber content and the manner of labeling products for purposes of applying tariffs on imported products and for informing the consumer. This practice is not intended to be a replacement for the requirements in 16 CFR 303, which may still apply to certain types of chemical protective clothing.
1.1 This practice covers the informational content of labels in or on chemical protective clothing. This practice also addresses putting label content on chemical protective clothing packaging when it is not practical to attach the label directly to the chemical protective clothing or print it on the chemical protective clothing item based on the size or type of the product.
1.2 This practice describes the recommended format and minimal content of the information to be included on the labels used for chemical protective clothing.
1.2.1 For the purposes of this practice, chemical protective clothing includes but is not limited to: suits, garments, and partial body garments such as hoods, aprons, sleeve protectors, gloves, and footwear.
1.2.2 Protective clothing is defined as any single item or combination of items used for the purpose of isolating parts of the body from direct contact with a potential hazard. It does not include individual parts of a protective clothing item designed to be worn as part of another item (for example, a faceshield or lens) unless it may be worn independently of the other items and still be used in a protective manner. For example, a glove or boot, unless permanently attached to a garment or suit, would be considered a protective clothing item requiring labeling, while a visor or vent valve would not. In summary, the intent of this practice is to only require labeling of parts of an ensemble that can be used independently for the protection of the user.
1.3 This practice does not cover user information provided by means other than item labeling such as instructions, informational packets, brochures, or other written means. User information is partly addressed in Practice .
1.4 This practice excludes those items covered under 16 CFR 303 unless specifically designed for use as chemical protective clothing.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
|2. Referenced Documents|
Do detailu prepracovaný a praxou overený informačný systém s normalizačnou tématikou.
Mesačne aktualizované -> stále platné technické normy.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2018-06-17 (Počet položiek: 2 056 253)
© Copyright 2018 NORMSERVIS s.r.o.