Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
Automaticky preložený názov:
Štandardné praktiky pre X - Ray Stanovenie zvyškového austenitu v oceli s Near Random Crystallographic Orientácia
NORMA vydaná dňa 10.7.2000
Označenie normy: ASTM E975-00
Poznámka: NEPLATNÁ
Dátum vydania normy: 10.7.2000
Kód tovaru: NS-48669
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
Austenitic steel, Crystallographic directions, Ferritic steel, Retained austenite, Structural analysis/applications, X-ray diffraction, X-ray determination of retained austenite (in steel), with near random, crystallographic orientation, practice, ICS Number Code 77.080.20 (Steels)
1. Scope |
1.1 This practice covers the determination of retained austenite phase in steel using integrated intensities (area under peak above background) of X-ray diffraction peaks using chromium K[alpha] or molybdenum K[alpha] X-radiation. 1.2 The method applies to carbon and alloy steels with near random crystallographic orientations of both ferrite and austenite phases. 1.3 This practice is valid for retained austenite contents from 1% by volume and above. 1.4 If possible, X-ray diffraction peak interference from other crystalline phases such as carbides should be eliminated from the ferrite and austenite peak intensities. 1.5 Substantial alloy contents in steel cause some change in peak intensities which have not been considered in this method. Application of this method to steels with total alloy contents exceeding 15 weight% should be done with care. If necessary, the users can calculate the theoretical correction factors to account for changes in volume of the unit cells for austenite and ferrite resulting from variations in chemical composition. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2025-07-02 (Počet položiek: 2 207 218)
© Copyright 2025 NORMSERVIS s.r.o.