Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM E898-88(2013) 1.12.2013 náhľad

Doplňujúce informácie

ASTM E898-88(2013)

Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances

Automaticky preložený názov:

Štandardná skúšobná metóda skúšanie Top-Loading, Direct-Čítanie Laboratórne váhy a váhy

NORMA vydaná dňa 1.12.2013

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 62.00 € Tlačené - 62.00 €
Dostupnosť	SKLADOM
Cena	62.00 € bez DPH
62.00 €

Informácie o norme:

Označenie normy: ASTM E898-88(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.12.2013
Kód tovaru: NS-48401
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Měření síly, váhy a tlaku

Anotácia textu normy ASTM E898-88(2013) :

Keywords:
balances, direct reading, laboratory, scales, top-loading, ICS Number Code 17.100 (Measurement of force, weight and pressure)

Doplňujúce informácie

Significance and Use

4.1 This method will enable the user to develop information concerning the precision and accuracy of weighing instruments. In addition, results obtained using this method will permit the most advantageous use of the instrument. Weaknesses as well as strengths of the instrument should become apparent. It is not the intent of this method to compare similar instruments of different manufacture, but to enable the user to choose a suitable instrument.

1. Scope

1.1 This test method covers the determination of characteristics of top-loading, direct-reading laboratory scales and balances. Laboratory scales of the top-loading type may have capacities from a few grams up to several kilograms. Resolution may be from 1/1000 of capacity to 1/1 000 000 or more. This method can be used for any of these instruments and will serve to measure the most important characteristics that are of interest to the user. The characteristics to be measured include the following:

1.1.1 warm-up,

1.1.2 off center errors,

1.1.3 repeatability, reproducibility, and precision,

1.1.4 accuracy and linearity,

1.1.5 hysteresis,

1.1.6 settling time,

1.1.7 temperature effects,

1.1.8 vernier or micrometer calibration, and

1.1.9 resistance to external disturbances.

1.2 The types of scales that can be tested by this method are of stabilized pan design wherein the sample pan does not tilt out of a horizontal plane when the sample is placed anywhere on the pan surface. The pan is located generally above the measuring mechanism with no vertical obstruction, except for draft shields. Readings of weight may be obtained from an optical scale, from a digital display, or from a mechanical dial. Weighing mechanisms may be of the deflecting type, using gravity or a spring as the transducer, or may be a force-balance system wherein an electromagnetic, pneumatic, hydraulic, or other force is used to counterbalance the weight of the sample. Other force-measuring devices may be tested by this method as long as a sample placed on a receiving platform produces an indication that is substantially a linear function of the weight of the sample.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.