Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Material (Withdrawn 2005)
Automaticky preložený názov:
Štandardné testovacie metódy pre opláštené termočlánky a opláštené termočlánku materiálu ( Withdrawn 2005 )
NORMA vydaná dňa 10.6.1996
Označenie normy: ASTM E839-96
Poznámka: NEPLATNÁ
Dátum vydania normy: 10.6.1996
Kód tovaru: NS-48201
Počet strán: 14
Približná hmotnosť: 42 g (0.09 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
Leak testing, Megohmeter test, Sheath integrity, Spectrometry-mass, Thermocouples-sheathed, Voltage, sheathed thermocouples/thermocouple material, methods of testing, Thermocouples-sheathed, standardizing test procedures, ICS Number Code 17.200.20 (Temperature-measuring instruments)
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||
1.1 These are test methods for sheathed thermocouple material and assemblies. 1.2 The tests are intended to assure quality control and to evaluate the suitability of sheathed thermocouple material or assemblies for specific applications. Some alternative test methods to obtain the same information are given, since in a given situation an alternative test method may be more practical. Service conditions are widely variable and so it is unlikely that all the tests described will be appropriate for a given thermocouple application. A brief statement is made following each test description to indicate when it might be used. 1.3 The tests described herein include test methods to measure the following properties of sheathed thermocouple material and assemblies. 1.3.1 Insulation Properties: 1.3.1.1 Compaction-absorption method and tension method, 1.3.1.2 Thickness, and 1.3.1.3 Resistance-room temperature and elevated temperature. 1.3.2 Sheath Properties: 1.3.2.1 Integrity-water test (two test methods) and mass spectrometer, 1.3.2.2 Dimensions-length, diameter, and roundness, 1.3.2.3 Wall thickness, 1.3.2.4 Surface-gross visual, finish, defect detection by dye penetrant, and cold-lap detection by tension test, 1.3.2.5 Metallurgical structure, and 1.3.2.6 Ductility-bend test and tension test. 1.3.3 Thermoelement Properties: 1.3.3.1 Calibration, 1.3.3.2 Homogeneity, 1.3.3.3 Drift, 1.3.3.4 Thermoelement diameter, roundness, and surface appearance, 1.3.3.5 Thermoelement spacing, 1.3.3.6 Thermoelement ductility, and 1.3.3.7 Metallurgical structure. 1.3.4 Thermocouple Assembly Properties: 1.3.4.1 Dimensions-length, diameter, and roundness, 1.3.4.2 Surface-gross visual, finish, reference end seal, and defect detection by dye penetrant, 1.3.4.3 Electrical-continuity, loop resistance, and connector polarity, 1.3.4.4 Insulation resistance-room temperature, and elevated temperature, 1.3.4.5 Radiographic inspection, 1.3.4.6 Thermoelement diameter, 1.3.4.7 Thermal response time, and 1.3.4.8 Thermal cycle. |
||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||
|
Posledná aktualizácia: 2024-05-12 (Počet položiek: 2 898 605)
© Copyright 2024 NORMSERVIS s.r.o.