Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM E352-18

Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

NORMA vydaná dňa 1.7.2018

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 100.80 € Tlačené - 100.80 €
Dostupnosť	SKLADOM
Cena	100.80 € bez DPH
100.80 €

Informácie o norme:

Označenie normy: ASTM E352-18
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.7.2018
Kód tovaru: NS-900623
Počet strán: 38
Približná hmotnosť: 114 g (0.25 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Chemická analýza kovů

Anotácia textu normy ASTM E352-18 :

Keywords:
alkalimetric, atomic absorption, chromium, cobalt, combustion analysis, copper, gravimetric, high-alloy steel, induction furnace, infrared absorption, ion exchange, lead, nickel, manganese, molybdenum, phosphorus, silicon, spectrometry, spectrophotometric, sulfur, tin, titration, titrimetric, tool steels, total carbon, vanadium,, ICS Number Code 77.040.30 (Chemical analysis of metals)

Doplňujúce informácie

Significance and Use

4.1 These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications particularly those under the jurisdiction of ASTM Committee A01 on Steel, Stainless Steel, and Related Alloys. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E882.

1. Scope

1.1 These test methods cover the chemical analysis of tool steels and other similar medium- and high-alloy steels having chemical compositions within the following limits:

Element

Composition Range, %

Aluminum

0.005 to 1.5

Boron

0.001 to 0.10

Carbon

0.03 to 2.50

Chromium

0.10 to 14.0

Cobalt

0.10 to 14.0

Copper

0.01 to 2.0

Lead

0.001 to 0.01

Manganese

0.10 to 15.00

Molybdenum

0.01 to 10.00

Nickel

0.02 to 4.00

Nitrogen

0.001 to 0.20

Phosphorus

0.002 to 0.05

Silicon

0.10 to 2.50

Sulfur

0.002 to 0.40

Tungsten

0.01 to 21.00

Vanadium

0.02 to 5.50

1.2 The test methods in this standard are contained in the sections indicated below:

Sections

Carbon, Total, by the Combustion—
Thermal Conductivity Method—
Discontinued 1986

125–135

Carbon, Total, by the Combustion Gravimetric
Method—Discontinued 2012

78–88

Chromium by the Atomic Absorption
Spectrometry Method

(0.006 % to 1.00 %)

174–183

Chromium by the Peroxydisulfate
Oxidation—Titration Method

(0.10 % to 14.00 %)

184–192

Chromium by the Peroxydisulfate-Oxidation
Titrimetric Method—Discontinued 1980

117–124

Cobalt by the Ion-Exchange—
Potentiometric Titration Method

(2 % to 14 %)

52–59

Cobalt by the Nitroso-R-Salt
Spectrophotometric Method

(0.10 % to 5.0 %)

60–69

Copper by the Neocuproine
Spectrophotometric Method

(0.01 % to 2.00 %)

89–98

Copper by the Sulfide Precipitation-
Electrodeposition Gravimetric Method

(0.01 % to 2.0 %)

70–77

Lead by the Ion-Exchange—Atomic
Absorption Spectrometry Method

(0.001 % to 0.01 %)

99–108

Manganese by the Periodate
Spectrophotometric Method

(0.10 % to 5.00 %)

9–18

Molybdenum by the Ion Exchange–
8-Hydroxyquinoline Gravimetric Method

203–210

Molybdenum by the Thiocyanate Spectrophotometric Method

(0.01 % to 1.50 %)

162–173

Nickel by the Dimethylglyoxime
Gravimetric Method

(0.1 % to 4.0 %)

144–151

Phosphorus by the Alkalimetric Method

(0.01 % to 0.05 %)

136–143

Phosphorus by the Molybdenum Blue
Spectrophotometric Method

(0.002 % to 0.05 %)

19–29

Silicon by the Gravimetric Method

(0.10 % to 2.50 %)

45–51

Sulfur by the Gravimetric
Method—Discontinued 1988

29–35

Sulfur by the Combustion-Iodate
Titration Method—Discontinued 2012

36–44

Sulfur by the Chromatographic
Gravimetric Method—Discontinued 1980

109–116

Tin by the Solvent Extraction—
Atomic Absorption Spectrometry Method

(0.002 % to 0.10 %)

152–161

Vanadium by the Atomic
Absorption Spectrometry Method

(0.006 % to 0.15 %)

193–202

1.3 Test methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.

1.4 Some of the composition ranges given in 1.1 are too broad to be covered by a single test method and therefore this standard contains multiple test methods for some elements. The user must select the proper test method by matching the information given in the Scope and Interference sections of each test method with the composition of the alloy to be analyzed.

1.5 The values stated in SI units are to be regarded as standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

E173-93	Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997)
D1193-06(2018)	Standard Specification for Reagent Water
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E50-17	Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E60-11(2022)e1	Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry (Includes all amendments and changes 6/29/2022).
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
ISO 5725	Precision of Test Methods--Determination of Repeatability and Reproducibility for Inter-Laboratory Tests
E351-18	Standard Test Methods for Chemical Analysis of Cast Iron´All Types
E353-19e1	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (Includes all amendments and changes 2/23/2022).
E882-10(2016)e1	Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory (Includes all amendments and changes 10/27/2017).
E1019-18	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E1024-97	Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
E1806-23	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
E350-23	Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.