Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM E351-93(2000)e1 1.1.2000 náhľad

Doplňujúce informácie

ASTM E351-93(2000)e1

Standard Test Methods for Chemical Analysis of Cast Iron--All Types (Includes all amendments And changes 8/16/2017).

Automaticky preložený názov:

Štandardné testovacie metódy pre chemickú analýzu liatiny - Všetky typy

NORMA vydaná dňa 1.1.2000

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 107.70 € Tlačené - 107.70 €
Dostupnosť	SKLADOM
Cena	107.70 € bez DPH
107.70 €

Informácie o norme:

Označenie normy: ASTM E351-93(2000)e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.1.2000
Kód tovaru: NS-46523
Počet strán: 48
Približná hmotnosť: 144 g (0.32 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Anotácia textu normy ASTM E351-93(2000)e1 :

Keywords:
carbon content, cast iron, cerium, chromium, cobalt, combustion analysis, copper, graphitic carbon, infrared sabsorption, lanthanum, lead, magnesium, manganese, molybdenum, nickel, phosphorus, silicon, sulfur, tin, titanium, vandium, ICS Number Code 77.040.30 (Chemical analysis of metals)

Doplňujúce informácie

1. Scope

1.1 These test methods cover the chemical analysis of pig iron, gray cast iron (including alloy and austenitic), white cast iron, malleable cast iron, and ductile (nodular) iron having chemical compositions within the following limits:

Element	Concentration Range, %

Aluminum⁴	0.003 to 0.50
Antimony	0.005 to 0.03
Arsenic⁴	0.02 to 0.10
Bismuth⁴	0.001 to 0.03
Boron⁴	0.001 to 0.10
Cadmium⁴	0.001 to0.005
Carbon	1.25 to 4.50
Cerium⁴	0.005 to 0.05
Chromium	0.01 to 30.00
Cobalt⁴	0.01 to 4.50
Copper	0.03 to 7.50
Lead⁴	0.001 to 0.15
Magnesium	0.002 to 0.10
Manganese	0.06 to 2.50
Molybdenum	0.01 to 5.00
Nickel	0.01 to 36.00
Phosphorus	0.01 to 0.90
Selenium⁴	0.001 to 0.06
Silicon	0.10 to 6.0
Sulfur	0.005 to 0.25
Tellurium⁴	0.001 to 0.35
Tin⁴	0.001 to 0.35
Titanium⁴	0.001 to 0.20
Tungsten⁴	0.001 to 0.20
Vanadium⁴	0.005 to 0.50
Zinc⁴	0.005 to 0.20

1.2 The test methods in this standard are contained in the sections indicated below:

	Sections

Carbon, Graphitic, by the Direct Combustion Gravimetric Method (1 to 3 %)	108
Carbon, Total by the Combustion Gravimetric Method (1.25 to 4.50 %)	97
Cerium and Lanthanum by the D-C Plasma Optical Emission Method (Ce: 0.003 to 0.5 %; La: 0.001 to 0.30 %)	237
Chromium by the Atomic Absorption Method (0.006 to 1.00 %)	208
Chromium by the Peroxydisulfate Oxidation-Titration Method (0.006 to 1.00 %)	218
Chromium by the Peroxydisulfate-Oxidation Titrimetric Method (0.05 to 30.0 %)	⁴^a
Cobalt by the Ion-Exchange-Potentiometric Titration Method (2.0 to 4.5 %)	53
Cobalt by the Nitroso-R-Salt Photometric Method (0.01 to 4.50 %)	61
Copper by the Neocuproine Photometric Method (0.03 to 7.5 %)	116
Copper by the Sulfide Precipitation-Electrodeposition Gravimetric Method (0.03 to 7.5 %)	81
Lead by the Ion-Exchange-Atomic Absorption Method (0.001 to 0.15 %)	126
Magnesium by the Atomic Absorption Method (0.002 to 0.10 %)	71
Manganese by the Periodate Photometric Method (0.10 to 2.00 %)	8
Manganese by the Peroxydisulfate-Arsenite Titrimetric Method (0.10 to 3.5 %)	152
Molybdenum by the Ion Exchange-8-Hydroxyquinoline Gravimetric Method	257
Molybdenum by the Photometric Method (0.01 to 1.5 %)	196
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to 36.00 %)	168
Nickel by the Ion Exchange-Atomic Absorption Method (0.005 to 1.00 %)	176
Phosphorus by the Alkalimetric Method (0.02 to 0.90 %)	160
Phosphorus by the Molybdenum Blue Photometric Method (0.02 to 0.90 %)	18
Silicon by the Gravimetric Method (0.1 to 6.0 %)	46
Sulfur by the Gravimetric Method	30
Sulfur by the Combustion-Iodate Titration Method (0.005 to 0.25 %)	37
Sulfur by the Chromatographic Gravimetric Method	⁴^b
Tin by the Solvent Extraction-Atomic Absorption Method (0.002 to 0.10 %)	186
Tin by the Sulfide-Iodometric Titration Method (0.01 to 0.35 %)	89
Titanium, Total, by the Diantipyrylmethane Spectrophotometric Method (0.006 to 0.35 %)	246
Vanadium by the Atomic Absorption Method (0.006 to 0.15 %)	227

1.3 Methods for the determination of several elements not included in this standard can be found in Test Methods E30 and Test Methods E1019.

1.4 Some of the concentration ranges given in 1.1 are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.

1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E380 are also used.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 5 and in special "Warning" paragraphs throughout these Methods.

2. Referenced Documents

E353-19e1	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (Includes all amendments and changes 2/23/2022).
E380-93	Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System) (Withdrawn 1997)
E882-10(2016)e1	Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory (Includes all amendments and changes 10/27/2017).
E1019-18	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E1024-97	Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
E1806-23	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
D1193-06(2018)	Standard Specification for Reagent Water
E50-17	Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E60-11(2022)e1	Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry (Includes all amendments and changes 6/29/2022).
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
E173-93	Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997)
E350-23	Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E352-23	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.