Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM E350-95(2000)e1 1.1.2000 náhľad

Doplňujúce informácie

ASTM E350-95(2000)e1

Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron (Includes all amendments And changes 8/16/2017).

Automaticky preložený názov:

Štandardné testovacie metódy pre chemickú analýzu uhlíkovej ocele, nízko , kremíkovo- ingotové železa , a tepaného železa

NORMA vydaná dňa 1.1.2000

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 109.60 € Tlačené - 109.60 €
Dostupnosť	SKLADOM
Cena	109.60 € bez DPH
109.60 €

Informácie o norme:

Označenie normy: ASTM E350-95(2000)e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.1.2000
Kód tovaru: NS-46519
Počet strán: 58
Približná hmotnosť: 174 g (0.38 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Anotácia textu normy ASTM E350-95(2000)e1 :

Keywords:

aluminum, antimony, bismuth, boron, calcium, carbon steel, cerium, chromium, cobalt, copper, ingot iron, lead, low-alloy steel, manganese, molybdenum, nickel, phosphorus, silicon, silicon electrical steel, tin, titanium, vanadium, ICS Number Code 77.040.30 (Chemical analysis of metals)

Doplňujúce informácie

1. Scope

1.1 These test methods cover the chemical analysis of carbon steels, low-alloy steels, silicon electrical steels, ingot iron, and wrought iron having chemical compositions within the following limits:

Element	Concentration Range, %
Aluminum	0.001 to 1.50
Antimony	0.002 to 0.03
Arsenic	0.0005 to 0.10
Bismuth	0.005 to 0.50
Boron	0.0005 to 0.02
Calcium	0.0005 to 0.01
Cerium	0.005 to 0.50
Chromium	0.005 to 3.99
Cobalt	0.01 to 0.30
Columbium (Niobium)	0.002 to 0.20
Copper	0.005 to 1.50
Lanthanum	0.001 to 0.30
Lead	0.001 to 0.50
Manganese	0.01 to 2.50
Molybdenum	0.002 to 1.50
Nickel	0.005 to 5.00
Nitrogen	0.0005 to 0.04
Oxygen	0.0001 to 0.03
Phosphorus	0.001 to 0.25
Selenium	0.001 to 0.50
Silicon	0.001 to 5.00
Sulfur	0.001 to 0.60
Tin	0.002 to 0.10
Titanium	0.002 to 0.60
Tungsten	0.005 to 0.10
Vanadium	0.005 to 0.50
Zirconium	0.005 to 0.15

1.2 The test methods in this standard are contained in the sections indicated as follows:

	Sections

Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20to 1.5 %)	124-131
Aluminum, Total, by the 8-Quinolinol Photometric Method (0.003to 0.20 %)	76-86
Aluminum, Total or Acid-Soluble, by the Atomic AbsorptionMethod (0.005 to 0.20 %)	308-317
Antimony by the Brilliant Green Photometric Method (0.0002 to0.030 %)	142-151
Bismuth by the Atomic Absorption Method (0.02 to 0.25 %)	298-307
Boron by the Distillation-Curcumin Photometric Method (0.0003to 0.006 %)	208-219
Calcium by the Direct-Current Argon Plasma Optical EmissionSpectroscopy Method (0.0005 to 0.010 %)	289-297
Carbon, Total, by the Combustion Gravimetric Method (0.05 to1.80 %)-Discontinued 1995
Cerium and Lanthanum by the D-C Plasma Optical EmissionMethod (0.003 to 0.50 % Cerium, 0.001 to 0.30 % Lanthanum)	249-257
Chromium by the Atomic Absorption Method (0.006 to 1.00 %)	220-229
Chromium by the Peroxydisulfate Oxidation-Titration Method(0.05 to 3.99 %)	230-238
Cobalt by the Nitroso-R Salt Photometric Method (0.01 to0.30 %)	53-62
Copper by the Atomic Absorption Method (0.004 to 0.5 %)	279-288
Copper by the Neocuproine Photometric Method (0.005 to1.50 %)	114-123
Lead by the Ion-Exchange-Atomic Absorption Method (0.001 to0.50 %)	132-141
Manganese by the Atomic Absorption Method (0.005 to 2.0 %)	269-278
Manganese by the Metaperiodate Photometric Method (0.01 to2.5 %)
Manganese by the Peroxydisulfate-Arsenite Titrimetric Method(0.10 to 2.50 %)	164-171
Molybdenum by the Thiocyanate Photometric Method (0.01 to1.50 %)	152-163
Nickel by the Atomic Absorption Method (0.003 to 0.5 %)	318-327
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to5.00 %)	180-187
Nickel by the Ion-Exchange-Atomic-Absorption Method (0.005to 1.00 %)	188-197
Phosphorus by the Alkalimetric Method (0.02 to 0.25 %)	172-179
Phosphorus by the Molybdenum Blue Photometric Method (0.003to 0.09 %)
Silicon by the Molybdenum Blue Photometric Method (0.01 to0.06 %)	103-113
Silicon by the Gravimetric Titration Method (0.01 to 3.5 %)	46-52
Sulfur by the Combustion-Iodate Titration Method (0.005 to0.03 %)	37-45
Tin by the Sulfide-Iodometric Titration Method (0.01 to 0.1 %)	95-102
Tin by the Solvent Extraction-Atomic Absorption Method (0.002to 0.10 %)	198-207
Titanium, Total, by the Diantipyrylmethane SpectrophotometricMethod (0.025 to 0.30 %)	258-268
Vanadium by the Atomic Absorption Method (0.006 to 0.15 %)	239-248

1.3 Test methods for the determination of several elements not included in this standard can be found in Test Methods E30 and Test Methods E1019.

1.4 Some of the concentration ranges given in 1.1 are too broad to be covered by a single test method and therefore this standard contains multiple test methods for some elements. The user must select the proper test method by matching the information given in the Scope and Interference sections of each test method with the composition of the alloy to be analyzed.

1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E380 are also used.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 5 and in special "Warning" paragraphs throughout these test methods.

2. Referenced Documents

E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
E882-10(2016)e1	Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory (Includes all amendments and changes 10/27/2017).
E1097-12(2017)	Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
IEEE/ASTM SI 10	Standard for Use of the International System of Units (SI): The Modern Metric System
ISO 5725	Precision of Test Methods--Determination of Repeatability and Reproducibility for Inter-Laboratory Tests
E50-17	Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E60-11(2022)e1	Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry (Includes all amendments and changes 6/29/2022).
E353-19e1	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (Includes all amendments and changes 2/23/2022).
E1019-18	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E1024-97	Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
E1806-23	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
D1193-06(2018)	Standard Specification for Reagent Water
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
E173-93	Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997)
E319-85(1997)	Standard Practice for the Evaluation of Single-Pan Mechanical Balances
E351-18	Standard Test Methods for Chemical Analysis of Cast Iron´All Types
E352-23	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.