Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for Intumescent Coatings
Automaticky preložený názov:
Štandardné praktiky pre intumescentním nátery
NORMA vydaná dňa 1.6.2014
Označenie normy: ASTM E2924-14
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.6.2014
Kód tovaru: NS-46271
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
application, intumescent coating, intumescent, fireproofing, intumescent paint, inspection, ICS Number Code 87.040 (Paints and varnishes)
Significance and Use | ||||||||||||||||||||||||||
5.1 This practice is intended for use by material specifiers, general contractors, applicators, or any individual or group requiring information regarding the application of 5.2 This practice is not intended to replace the manufacturer’s application instructions. |
||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||
1.1 This practice provides architects, specifiers and building owners various consensus recommendations to specify industry’s best practices for 1.2 This practice covers the best practice for the following: 1.2.1 The manufacturing, testing, labeling, transportation, delivery, and storage, including shelf life, of intumescent coatings. 1.2.2 The application of the 1.2.3 The inspection, including safety and equipment, of intumescent coatings during and after the application. 1.3 Standard Practice—This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title means only that the document has been approved through the ASTM consensus process. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
|
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
|
|
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
|
|
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
|
|
Standard Terminology of Building Constructions
|
|
Standard Terminology of Fire Standards
|
ISO/IEC 17065
|
Conformity Assessment--Requirements for Bodies Certifying Products, Processes and Services
|
ISO/IEC 17025
|
General Requirements for the Competence of Testing and Calibration of Laboratories
|
ISO/IEC 17020
|
General Criteria for the Operation of Various Types of Bodies Performing Inspection
|
ISO/IEC 17011
|
Conformity Assessment--General Requirements for Accreditation Bodies Accrediting Conformity Assessment Bodies
|
ISO 834-1
|
Fire-resistance Tests--Elements of Building Construction-Part 1: General Requirements
|
|
Standard Test Method for Rubber Property—Durometer Hardness
|
ISO/IEC Guide 65
|
General Requirements for Bodies Operating Product Certification Systems
|
|
Standard Test Methods for Fire Tests of Building Construction and Materials |
Historická
1.7.2013
Historická
15.12.2012
Historická
1.7.2009
Historická
1.12.2010
Historická
1.2.2011
Historická
1.6.2012
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.