ASTM E2751/E2751M-17a

Standard Practice for Design and Performance of Supported Laminated Glass Walkways (Includes all amendments and changes 9/1/2017).



NORMA vydaná dňa 1.7.2017


Jazyk
Prevedenie
DostupnosťSKLADOM
Cena39.50 bez DPH
39.50

Informácie o norme:

Označenie normy: ASTM E2751/E2751M-17a
Dátum vydania normy: 1.7.2017
Kód tovaru: NS-687773
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Kategórie - podobné normy:

Sklo pro stavebnictví

Anotácia textu normy ASTM E2751/E2751M-17a :

Keywords:
annealed glass, glass, glass floor, glass stair treads, glass walkways, heat-strengthened glass, laminated glass, tempered glass,, ICS Number Code 81.040.20 (Glass in building)

4.5 The manufacturer or designer of glass walkway systems shall provide installation directions and fabrication and installation tolerances of their systems.

4.6 The structural integrity of the glass walkway system after glass breakage shall be sufficient to support the design loads after any one glass ply is broken. If damage of any kind occurs, the walkway shall be cordoned off and the installation shall be inspected to ensure structural integrity and pedestrian safety of the system.

  1. Scope

1.1 This practice addresses elements related to load-bearing glass walkways, glass treads, and glass landings constructed with laminated glass. This standard includes performance, design, and safe behavior considerations. It addresses the characteristics unique to glass and laminated glass. Issues that are common to all walkways, such as slip resistance, are addressed in existing referenced standards.

1.2 This practice does not address glass walkways constructed with monolithic glass, glass block, insulating glass units, glass tiles that are directly bonded to a non-glass structural substrate, or glass walkways intended to support vehicular traffic.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  2. Referenced Documents

C1048

Specification for Heat-Strengthened and Fully Tempered Flat Glass

C1036

Specification for Flat Glass

ANSI/ASSE TR-A1264.3-2007

ANSI Technical Report, Using Variable Angle Tribometers (VAT) for Measurement of the Slip Resistance of Walkway Surfaces

F609

Test Method for Using a Horizontal Pull Slipmeter (HPS)

E1300

Practice for Determining Load Resistance of Glass in Buildings

C1028

Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method

C1172

Specification for Laminated Architectural Flat Glass

E631

Terminology of Building Constructions

Odporúčame:

Aktualizácia technických noriem

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.


Tento web používa cookies. Ďalším prechádzaním tohto webu vyjadrujete súhlas s ich používaním. Viac informácií / Rozumiem