Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL
Automaticky preložený názov:
Štandardné praktiky pre odber vzoriek z prúdu produktu pomocou atribútov radených podľa AQL
NORMA vydaná dňa 1.4.2013
Označenie normy: ASTM E2234-09(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2013
Kód tovaru: NS-44745
Počet strán: 62
Približná hmotnosť: 186 g (0.41 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
acceptance quality level (AQL), average outgoing quality (AOQ), average outgoing quality limit (AOQL), classification of defects, critical defect, critical defective, defect, defective, defects per hundred units, inspection, inspection by attributes, lot or batch, lot or batch size, major defect, major defective, minor defect, minor defective, percent defective, process average, sample, sample size code letter, sampling plan, unit of product, ICS Number Code 07.020 (Mathematics)
Significance and Use | ||||||||
4.1 Purpose—This publication establishes lot or batch sampling plans and procedures for inspection by attributes. This publication shall not be interpreted to supersede or conflict with any contractual requirements. The words “accept,” “acceptance,” “acceptable,” etc, refer only to the contractor’s use of the sampling plans contained in this standard and do not imply an agreement by the customer (formerly “Government” in original text) to accept any product. Determination of acceptability by the customer shall be as described in contractual documents. The sampling plans described in this standard are applicable to AQL’s of 0.01 percent or higher and are therefore not suitable for applications where quality levels in the range of parts per million levels can be realized. 4.2 Application—Sampling plans designated in this publication are applicable, but not limited, to inspection of the following: (1) end items, (1.1 This practice establishes lot or batch sampling plans and procedures for inspection by attributes using MIL-STD-105E as a basis for sampling a steady stream of lots indexed by AQL. 1.2 This practice provides the sampling plans of MIL-STD-105E in ASTM format for use by ASTM committees and others. It recognizes the continuing usage of MIL-STD-105E in industries supported by ASTM. Most of the original text in MIL-STD-105E is preserved in Sections 4-6 of this practice. 1.3 No system of units is specified in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||
2. Referenced Documents | ||||||||
|
Historická
1.11.2013
Historická
1.8.2012
Historická
1.7.2010
Historická
1.5.2012
Historická
1.4.2014
Historická
15.11.2013
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.