Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
        
        Standard Practice for Reporting Results from Methods of Chemical Analysis
          Automaticky preložený názov:
          Štandardné praktiky pre podávanie správ o výsledkoch z metódy chemickej analýzy        
      
NORMA vydaná dňa 1.10.2010
    
        Označenie normy: ASTM E1950-10
                
                
                
                Poznámka:    NEPLATNÁ
               
                Dátum vydania normy:  1.10.2010
                  Kód tovaru:  NS-43704
          Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
        Krajina:          Americká technická norma
        Kategória: Technické normy ASTM
        
                
              
Keywords:
quantitative results, reporting results, Chemical analysis, Recording/reporting data analysis results, ICS Number Code 71.040.40 (Chemical analysis)
| Significance and Use | ||||||||
| A result must be stated to a sufficient number of digits so that a user receives both quantitative information and a measure of the variability of the value reported. The range of application of most methods of chemical analysis is based upon the presumption that the quantitative results produced are to be used to compare the analyte content of the test material with specified limiting values. However, analytical results may be used legitimately for other purposes. If the same material is analyzed a number of times or a product is analyzed periodically during an interval of production, each set of results may be averaged to yield an average result having improved reliability, provided nothing has been done between analyses to modify the composition of the analyzed material. Results that fall below the lower limit, although not quantitative individually, contain compositional information and may be reported. The reporting system in this practice permits the analyst to indicate which values are likely to be rendered quantitative by averaging and which are not. The system is simple enough to be used routinely in reporting results from standard methods and assists those untrained in statistics to apply results appropriately. | ||||||||
| 1. Scope | ||||||||
| 1.1 This practice covers the approximate number of digits required to express the expected precision of results reported from standard methods of chemical analysis. This practice provides selection criteria and proper form and symbols for coding results when necessary to indicate the relative reliability of results having small values. 1.2 Specifically excluded is consideration of report forms and the associated informational content of reports in which results are tabulated or transmitted. It is assumed that the reporting laboratory has established a report format to ensure proper identification of the materials tested, the nature and conditions of the test, the responsible personnel, and other related information in accordance with existing regulations and good laboratory practices. | ||||||||
| 2. Referenced Documents | ||||||||
| 
 | 
  Historická
1.10.2010
  Historická
1.3.2009
  Historická
1.6.2014
  Historická
1.5.2010
  Historická
1.3.2008
  Historická
1.2.2011
Posledná aktualizácia: 2025-10-30 (Počet položiek: 2 241 708) 
© Copyright 2025 NORMSERVIS s.r.o.