Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
Automaticky preložený názov:
Štandardné Sprievodca pre meranie ionizujúceho žiarenia vyvolanej Spektrálne Zmeny v optických vláknach a káble pre použitie v diaľkovom Ramanovho spektroskopie Fiberoptic
NORMA vydaná dňa 1.1.2013
Označenie normy: ASTM E1654-94(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.1.2013
Kód tovaru: NS-42531
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
optical fibers, radiation damage, Raman spectroscopy, remote sensing, ICS Number Code 33.180.10 (Fibres and cables)
Significance and Use | ||
4.1 Ionizing environments will affect the performance of optical fibers/cables being used to transmit spectroscopic information from a remote location. Determination of the type and magnitude of the spectral variations or interferences produced by the ionizing radiation in the fiber, or both, is necessary for evaluating the performance of an optical fiber sensor system. 4.2 The results of the test can be utilized as a selection criteria for optical fibers used in optical fiber Raman spectroscopic sensor systems. 1.1 This guide covers the method for
measuring the real time, in situ radiation-induced alterations to
the Raman spectral signal transmitted by a multimode, step index,
silica optical fiber. This guide specifically addresses
steady-state ionizing radiation (that is, alpha, beta, gamma,
protons, etc.) with appropriate changes in dosimetry, and shielding
considerations, depending upon the irradiation source.
1.2 The test procedure given in this guide is not intended to test the other optical and non-optical components of an optical fiber-based Raman sensor system, but may be modified to test other components in a continuous irradiation environment. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-08-18 (Počet položiek: 2 342 672)
© Copyright 2024 NORMSERVIS s.r.o.