Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
Automaticky preložený názov:
Štandard Specification pre Hrubé stojatá drážka hliníkový strešný panelové systémy
NORMA vydaná dňa 15.8.2011
Označenie normy: ASTM E1637-98(2011)
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.8.2011
Kód tovaru: NS-42461
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
aluminum, anchorage, clips, construction, deflection, endlaps, environmental, exposed, exposures, fasteners, flashings, installation, joints, loading, loads, low-sloped, metal, oil canning, panels, penetrations, ponding, roof, sealer, seismic, service life, sidelap, slope, snow, standing seam, structural, superimposed, tapes, thermal, uplift, water, weathertightness: Aluminum roofing materials--specifications, Anchors/anchorage systems, Architectural materials/applications--specifications
1. Scope | ||||||||||||||||||||||||||||||||||||
1.1 This specification covers the design, construction, and weatherability of structural standing seam aluminum roof panel systems. It includes performance requirements for the following elements only: panels, concealed panel clips, panel/clip anchorage, and panel joint sealers. Note 1—These systems are used on both low-slope and steep-slope roof applications. They also are used with or without an underlying deck or sheathing. 1.2 The objective of this specification is to provide for the overall performance of the structural standing seam aluminum roof panel system as defined in 3.2.6 during its service life in order to provide weather protection, carry the specified design loads, and allow proper access over the roof surface in order to provide for periodic maintenance of the equipment by the building owner. 1.3 In addition to structural characteristics, the specifier shall evaluate other characteristics beyond the scope of this specification that affect the final choice of roof construction. These include, but are not limited to, functional, legal, insurance, and economic considerations. See Appendix X1 for the specifier's checklist. 1.4 This specification is not intended to exclude products or systems not covered by the referenced documents. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The text of this specification contains notes and footnotes that provide explanatory information and are not requirements of this specification. |
||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||
|
Posledná aktualizácia: 2024-07-17 (Počet položiek: 2 336 011)
© Copyright 2024 NORMSERVIS s.r.o.