Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
NORMA vydaná dňa 1.6.2022
Označenie normy: ASTM E1573-22
Dátum vydania normy: 1.6.2022
Kód tovaru: NS-1066659
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
A-weighted, one-third-octave-band, one-third-octave-band sound pressure levels, open offices, sound masking,, ICS Number Code 91.120.20 (Acoustics in buildings. Sound insulation)
Significance and Use | ||||||
5.1?Acoustical performance is dependent on many factors (see Guide E1374 for a discussion on general office acoustical considerations). One of these factors is the masking sound. The masking spectrum shape and level must conform within specified tolerances throughout the treated area. The measurement and recording of these parameters are addressed in this test method. 5.2?The results from this test method are used to determine if the masking sound meets a particular specification. |
||||||
1. Scope | ||||||
1.1?This test method specifies the procedure used to measure the masking sound in terms of A-weighted and one-third-octave-band sound pressure levels. 1.2?The results of this test method can be used to determine if and where the masking sound meets (or does not meet) a particular specification. 1.3?This test method does not evaluate the overall acoustical environment. It is intended only to measure and report the masking sound levels. 1.4?The values stated in SI units are to be regarded as standard. The values in parentheses are for information only. 1.5?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||
2. Referenced Documents | ||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-21 (Počet položiek: 2 206 478)
© Copyright 2024 NORMSERVIS s.r.o.