Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Guide for Biopharmaceutical Facilities Architectural Design Considerations
Automaticky preložený názov:
Štandardné Sprievodca pre Biofarmaceutická priestory architektonického návrhu úvahy
NORMA vydaná dňa 1.1.2001
Označenie normy: ASTM E1567-93
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.1.2001
Kód tovaru: NS-42215
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
architectural, biopharmaceutical, cGMP, containment, controlled environment, facilities, layout
Significance and Use | ||||
This guide is intended for use in designing laboratory, pilot plant, commercial production buildings that will use processes involving living organisms to produce products. These products are also manufactured under the FDA and other federal agency regulations. These guidelines include the layout of facilities, design of containment areas, ventilation and air quality, personnel areas, special processing hazards, controlled environment areas, and other items. This guide is for use by engineers, architects, and owners of biopharmatechnical manufacturing facilities to consider the special factors in laying out the facilities to meet cGMP requirements and other good engineering principles. By using these guidelines along with other design criteria required by a variety of regulatory agencies, a validation effort can be achieved more easily to meet agency requirements and obtain operating permits. This guide is intended to provide general guidelines for consideration and application in a variety of plant operations and processes in which the designers can make specific decisions concerning the exact architectural design features to use. |
||||
1. Scope | ||||
1.1 This guide covers architectural design considerations for buildings and facilities used in the biological processing industry to make drugs, chemicals, and other products. 1.2 These designs are intended to meet current good manufacturing practices (cGMP) criteria and guidelines published by the U.S. Food and Drug Administration (FDA) for processes and products manufactured under CFR Title 21. 1.3 While the guidelines described are general in nature, they are not expected to apply to all of the possible biotechnical processes used in the industry today. Accordingly, the user of this guide must exercise good engineering judgment in specific design applications to select the proper guidelines that apply. 1.4 In addition to the cGMP guidelines provided herein, other regulations and guides should be considered that are promulgated by other federal agencies such as the Occupational Safety and Health Administration (OSHA), the U.S. Environmental Protection Agency (EPA), the U.S. Drug Administration (USDA), the National Institute of Health (NIH), and so forth. 1.5 While the buildings will be designed to meet specific functional requirements and comply with local zoning ordinances, building codes, handicapped employee standards, and so forth, these considerations are not included in this guide. 1.6 The values stated in SI units are to be regarded as the standard. 1.7 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Posledná aktualizácia: 2024-07-18 (Počet položiek: 2 337 971)
© Copyright 2024 NORMSERVIS s.r.o.