Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM E1364-95(2000)
Standard Test Method for Measuring Road Roughness by Static Level Method
Automaticky preložený názov:
Štandardná skúšobná metóda pre meranie nerovnosť na vozovke podľa statickej metódy Level
NORMA vydaná dňa 10.7.2000
Informácie o norme:
Označenie normy: ASTM E1364-95(2000)
Poznámka: NEPLATNÁ
Dátum vydania normy: 10.7.2000
Kód tovaru: NS-41505
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Anotácia textu normy ASTM E1364-95(2000) :
Keywords:
nstrumental measurement, vehicular traveled surfaces-road roughness, by static level test, , International Roughness Index (IRI), vehicular traveled surfaces-road roughness, by static level test, , Leveling characteristics, vehicular traveled surfaces-road roughness, by static level test, , Longitudinal profile, vehicular traveled surfaces-road roughness, by static level test, , Pavement surfaces, vehicular traveled surfaces-road roughness, by static level test,
Doplňujúce informácie
| 1. Scope | ||||||
|
1.1 This test method covers the measurement of a longitudinal profile of a travelled surface using a static level for the purpose of obtaining a road roughness index. This test method is suitable for all surface types that are travelled by conventional ground vehicles, including paved and unpaved roads. 1.2 This test method is labor-intensive with respect to other means for measuring longitudinal profile, and is used mainly for ( ) validating other profile-measuring methods and ( ) calibrating response-type roughness-measuring systems. Note 1-When measuring road roughness with a static level for the purposes of validating other profile-measuring methods or calibrating response-type roughness-measuring systems, the static level measurement process should be evaluated to ensure the measurements are within the resolution required in Table 1. It is recommended that several locations be marked at various distances from the level and these locations be measured in sequence several times to establish if the readings stay within the resolution required. Wind, distance between the rod and the level, surface texture, and positioning of the rod all have significant impact on the repeatability of the elevation measurements. Any variation from the true elevations will primarily affect the bias as explained in10.2. To determine the effect of random variations, random variations can be added to an existing profile and the IRI recalculated to determine the impact of the variations.1.3 This test method describes the computation required for one particular type of roughness index, the vehicle simulation used in the International Roughness Index (IRI). Additionally, the profile obtained with this test method can be processed to obtain other roughness measures. 1.4 This test method includes two levels of accuracy that can be chosen according to need. The more accurate, designated as Class 1, reduces the measurement error of the roughness index to less than 2% of the true value of the index. The second, designated as Class 2, involves errors less than 5%. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
| 2. Referenced Documents | ||||||
|
Odporúčame:
Aktualizácia zákonov
Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
