Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture (Withdrawn 2022)
NORMA vydaná dňa 1.6.2021
Označenie normy: ASTM E1353-21
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.6.2021
Kód tovaru: NS-1028060
Počet strán: 12
Približná hmotnosť: 36 g (0.08 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
cigarette, component, furniture, ignition, resistance, upholstered,, ICS Number Code 13.220.40 (Ignitability and burning behaviour of materials and products),97.140 (Furniture)
Significance and Use | ||||
5.1?These test methods are intended to estimate the performance of upholstered furniture under conditions of exposure to a smoldering cigarette. This is accomplished by testing furniture component assemblies. However, interactions between components in production furniture are not necessarily predicted by component assembly testing. 5.2?These test methods are not intended to measure the performance of upholstered furniture under conditions of open flame exposure, and do not indicate whether the furniture will resist the propagation of flame under severe fire exposure or when tested in a manner that differs substantially from the test standard. 5.3?The results obtained with a material component tested in mock-up, in accordance with these test methods, do not necessarily indicate the performance of the same material component in other geometric configurations, such as in full-size furniture. |
||||
1. Scope | ||||
1.1?This is a fire-test-response standard. 1.2?These test methods are designed for the assessment of the resistance of upholstered furniture component assemblies to combustion after exposure to smoldering cigarettes under specified conditions. 1.3?The tests apply to upholstered furniture componentscover fabrics, interior fabrics, welt cords, decking materials, barrier materials, and filling or padding materials including but not limited to: battings of natural or man-made fibers, foamed or cellular filling materials, resilient pads of natural or man-made fibers, and loose particulate filling materials (such as shredded polyurethane or feathers and down). 1.4?The individual test methods and the materials to which they apply are as follows: 1.4.1?Cover Fabric TestApplies to outer cover fabrics (see Sections 10 and 11). 1.4.2?Interior Fabric TestApplies to interior fabrics used in intimate contact with outer fabrics (see Sections 12 and 13). 1.4.3?Welt Cord TestApplies to welt cord (see Sections 14 and 15). 1.4.4?Filling/Padding Component TestApplies to resilient materials used under the cover fabric in seats or in inside vertical walls (inside arm and inside backs) (see Sections 16 and 17). 1.4.5?Decking Materials TestApplies to resilient materials used in the deck under loose cushions (see Sections 18 and 19). 1.4.6?Barrier Materials TestApplies to materials that are intended to serve as a barrier between cover fabric and conventional polyurethane foam (see Sections 20 and 21). 1.5?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6?This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.7?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||
2. Referenced Documents | ||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-01 (Počet položiek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.