Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases
Automaticky preložený názov:
Štandardné Príručka pre identifikáciu kovov a zliatin v počítačových databázach hmotný majetok
NORMA vydaná dňa 1.11.2015
Označenie normy: ASTM E1338-09(2015)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2015
Kód tovaru: NS-622656
Počet strán: 9
Približná hmotnosť: 27 g (0.06 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
alloys, computerized databases, computerized material property databases, databases, data elements, metals,, ICS Number Code 77.120.01 (Non-ferrous metals in general)
Significance and Use | ||||||||||||||||||||
4.1 This guide describes the types of information that are indispensable for uniquely identifying a metal or alloy in a computerized database. The purpose is to facilitate standardized storage and retrieval of the information with a computer, and allow meaningful comparison of data from different sources. 4.2 Many numbering systems for metals and alloys have been developed which are based on their chemical compositions. Separate systems have also evolved to describe the thermomechanical condition of metals and alloys in order to narrow their description. It is the separation into logical data elements from these complex, historically significant, and overlapping systems of identification that is the challenge in the identification of metals and alloys within computerized databases. 4.3 This guide is intended to provide a common starting point for designers and builders of materials property databases. This guide generally identifies the contents of the database in terms of data elements, but does not recommend any particular logical or physical database design. A database builder has considerable flexibility in designing a database schema, and it is intended that this guide support that flexibility. 4.4 It is recognized that material property databases will be designed for different levels of material information and for different purposes. For example, a database developed by an industry trade group might only identify typical properties generally representative of those for a particular metal or alloy, and not actual values measured on a specific sample. On the other hand, a business might desire to manage data on specific lots it procures, or even properties of a specific piece or sample from a lot. Consequently, some of the data elements identified in this guide might not be applicable in every database instance. 4.5 The extent of material identification implemented in a particular database depends on its specific purpose. A single organization may include substantial detail in its database. Less detail may be included in a common database used by several organizations because of commercial and other considerations. Since metals and alloys are diverse and the technologies are always changing, recommendations should not be regarded as exclusive of additional data elements for material identification. The recommended data elements should be expanded if additional detailed information which serves to identify materials is to be recorded. 4.6 A number of data elements are considered essential to any database and need to exist in the database. Data elements are considered essential if they are required for users to have sufficient information to interpret the data and be confident of their ability to compare sets of data for materials from different sources. Failure to complete an essential data element may render the record unusable in a database or in data exchange. Essential refers to the quality or completeness of recorded data, and does not necessarily have direct meaning relative to database structure. In some cases, the identified data element might be accommodated within a particular database without explicitly including a field just for the essential data element. Additionally, a database schema may require additional data fields to be not null to maintain data record integrity or to implement a mandatory data relationship. These additional fields are beyond the scope of this guide. Finally, it is also noted that a data element identified as essential in this guide might not be relevant for a database created for a specific application of limited scope. 4.7 This guide presents a listing of the data elements and does not intend to define any single organization of the data elements to be used in either a logical or physical model for the database. The data element lists are divided by group headings for discussion purposes only. The group headings are not intended to identify normalization of the database model; this is left to the database designer. 4.8 Numerous data elements listed in this guide may need to be repeated to identify even a single material. Depending on the database purpose or design, it may be appropriate to design the database to enable additional repeatable data elements. How the database should accommodate multiple values for a given data element is another question left to the database designer. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This guide covers the identification of metals and alloys in computerized material property databases. It establishes essential and desirable data elements that serve to uniquely identify and describe a particular metal or alloy sample as well as properties that identify a given metal or alloy in general. 1.1.1 This guide does not necessarily provide sufficient data elements to describe weld metal, metal matrix composites, or joined metals. 1.1.2 The data element identified herein are not all germane to every metal or alloy group. 1.1.3 Different sets of data elements may also be applied within a given metal or alloy group depending on conditions or applications specific to that metal or alloy group. Further, within a particular metal or alloy group, different sets of data elements may be used to identify specific material conditions. 1.1.4 Table 1 on Recommended Data Elements and Tables 2-17 on values for specific data elements appear at the end of this guide. 1.2 Some of the data elements in this
guide may be useful for other purposes. However, this guide does
not attempt to document the essential and desirable data element
for any purpose except for the identification of metals and alloys
in computerized material property databases. Other purposes, such
as material production, material procurement, and material
processing, each may have different material data reporting
requirements distinct from those covered in this guide. A specific
example is the contractually required report for a material
property testing series. Such a report may not contain all the data
elements considered essential for a specific computerized database;
conversely, this guide may not contain all the data elements
considered essential for a contracted test report.
1.3 Results from material tests conducted as part of the procurement process are often used to determine adherence to a specification. While this guide includes a number of test result data elements, such data elements are included in this guide only for the purposes of material identification. 1.4 Reporting of contracted test results, such as certification test results, shall follow the requirements described in the material specification, or as agreed upon between the purchaser and the manufacturer. 1.5 This guide contains a limited number of data elements related to material test results. These data elements are for material identification purposes and are not intended to replace the more detailed sets of data elements listed in guides such as Guide E1313 covering data recording formats for mechanical testing of metals. For material identification purposes, the data elements in this guide include typical, nominal, or summary properties normally derived from a population of individual specimen tests. If warranted by the scope of a particular database system, the system might provide links between the material identification data elements given in this guide, and the individual specimen test results recorded in accordance with other guides corresponding to particular test methods. 1.6 Material Classes—See ANSI/AWS A9.1-92 for arc welds, Guide E527 for Metal and Alloys in the Unified Numbering System (UNS), Guide E1308 for polymers, Guide E1309 for composite material, and Guide E1471 for fibers, fillers, and core materials. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-08-29 (Počet položiek: 2 344 943)
© Copyright 2024 NORMSERVIS s.r.o.