Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
NORMA vydaná dňa 1.10.2019
Označenie normy: ASTM D7773-19
Dátum vydania normy: 1.10.2019
Kód tovaru: NS-973591
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
filter, hydrobromic acid, hydrochloric acid, ion chromatography, nitric acid, workplace air,, ICS Number Code 13.040.30 (Workplace atmospheres)
|Significance and Use|
5.1 Exposure to inorganic acids in workplace air can cause irritations of the skin, eyes and respiratory tract, and exposure limits for hydrochloric acid, hydrobromic acid and nitric acid in air have been established to reduce exposure risks to potentially affected workers (. ) Sampling and analytical methods for volatile inorganic acids are needed for exposure assessment and risk reduction purposes.
1.1 This test method is intended for use in the determination of the time-weighted average mass concentration of hydrogen chloride gas and hydrochloric acid mist, hydrogen bromide vapor and hydrobromic acid mist, and nitric acid vapor and mist in workplace air. The samples are collected on an alkali-impregnated quartz fiber filter and analyzed by ion chromatography. This test method is also appropriate for measuring short term exposures.
1.2 This test method assumes that air samples are collected using appropriate and applicable ASTM International standards for sampling of workplace air.
1.3 The procedure is targeted for occupational and environmental hygiene monitoring purposes.
1.4 No detailed operating instructions are provided because of differences among various makes and models of suitable instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument. This standard does not address comparative accuracy of different devices or the precision between instruments of the same make and model.
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 This test method contains notes, which are explanatory and not part of mandatory requirements of the standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
|2. Referenced Documents|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2021-10-24 (Počet položiek: 2 536 738)
© Copyright 2021 NORMSERVIS s.r.o.