Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography
Automaticky preložený názov:
Štandardná skúšobná metóda pre stanovenie obsahu prchavých anorganických kyselín (HCl, HBr, a HNO3) pomocou filtra vzorkovanie a potlačil Ion chromatografia
NORMA vydaná dňa 1.1.2012
Označenie normy: ASTM D7773-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.1.2012
Kód tovaru: NS-39093
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
filter, hydrobromic acid, hydrochloric acid, ion chromatography, nitric acid, workplace air, ICS Number Code 13.040.30 (Workplace atmospheres)
Significance and Use | ||||||||||||||
Exposure to inorganic acids in workplace air can cause irritations of the skin, eyes and respiratory tract, and exposure limits for hydrochloric acid, hydrobromic acid and nitric acid in air have been established to reduce exposure risks to potentially affected workers (1). Sampling and analytical methods for volatile inorganic acids are needed for exposure assessment and risk reduction purposes. |
||||||||||||||
1. Scope | ||||||||||||||
1.1 This test method is intended for use in the determination of the time-weighted average mass concentration of hydrogen chloride gas and hydrochloric acid mist, hydrogen bromide vapor and hydrobromic acid mist, and nitric acid vapor and mist in workplace air. The samples are collected on an alkali-impregnated quartz fiber filter and analyzed by ion chromatography. The method is also appropriate for measuring short term exposures. 1.2 This test method assumes that air samples are collected using appropriate and applicable ASTM International standards for sampling of workplace air. 1.3 The procedure is targeted for occupational and environmental hygiene monitoring purposes. 1.4 No detailed operating instructions are provided because of differences among various makes and models of suitable instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument. This standard does not address comparative accuracy of different devices or the precision between instruments of the same make and model. 1.5 The values stated in SI units are to be regarded as the standard. 1.6 The practice contains notes, which are explanatory and not part of mandatory requirements of the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Historická
15.10.2012
Historická
1.10.2011
Historická
1.4.2014
Historická
1.6.2012
Historická
15.1.2014
Historická
1.8.2010
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.