Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
Automaticky preložený názov:
Štandardná skúšobná metóda pre stanovenie zrýchleného Iron korózii s ropnými produktmi
NORMA vydaná dňa 15.6.2009
Označenie normy: ASTM D7548-09
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.6.2009
Kód tovaru: NS-38703
Počet strán: 10
Približná hmotnosť: 30 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
aviation turbine fuel, biodiesel, corrosion, corrosion rating chart, diesel, ethanol-blended gasoline, gasoline, gasoline-blend components, iron, light cycle oil, No. 1 fuel oil, No. 2 fuel oil, reagent water, rust, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||||||||||||||
In general, wherever the possibility exists of water getting mixed with products/material (covered under 1.1) the results obtained by this test method will indicate the degree to which corrosion of iron components can be expected. Test also determines the antirust properties of products/material (covered under 1.1) in preparation for the various stages through which the tested product may pass prior to or during its transport through a pipeline. Test results are also meant to show whether or not the dosage levels and type of iron corrosion inhibitor added to a product/material (covered under 1.1) is sufficient for achieving the desired protection of affected assets such as storage tanks, process lines, and shipment systems. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This test method covers an accelerated laboratory and field procedure for the determination of corrosion of iron, in the presence of water, on samples such as gasoline and gasoline blended with 10% ethanol, E10 (Specification D 4814); gasoline-blend components (except butane); diesel fuel and biodiesel B5, except Grade No. 4-D (Specification D 975); biodiesel B6 to B20 (Specification D 7467); diesel-blend component such as light cycle-oil; No.1 fuel oil, No.2 fuel oil (Specification D 396); aviation turbine fuel (Specification D 1655). 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Historická
1.5.2013
Historická
1.10.2011
Historická
15.4.2009
Historická
1.5.2011
Historická
1.5.2010
Historická
1.5.2011
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.