Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
Automaticky preložený názov:
Štandardná skúšobná metóda pre Accelerated dotvarovanie tlakom geosyntetík na superpozície čas-teplota Based Použitie osadením izotermickej metódy
NORMA vydaná dňa 1.7.2012
Označenie normy: ASTM D7361-07(2012)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.7.2012
Kód tovaru: NS-38276
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
creep, geosynthetics, hold test, ramp, stepped isothermal method, time-temperature superposition, ICS Number Code 59.080.70 (Geotextiles)
Significance and Use | ||||||||||
5.1 Use of the SIM decreases the time required for creep to occur and the obtaining of the associated data. 5.2 The statements set forth in Section 5.3 Creep test data are used to calculate the creep modulus of materials as a function of time. These data are then used to predict the long-term creep deformation expected of geosynthetics used in drainage applications. 5.4 R+H testing is done to establish
the range of creep strains experienced in the brief period of very
rapid response following the peak of the load ramp.
|
||||||||||
1. Scope | ||||||||||
1.1 This test method covers accelerated testing for compressive creep properties using the Stepped Isothermal Method (SIM). 1.2 The test method is focused on geosynthetic drainage materials such as HDPE geonet specimens. 1.3 The SIM tests are laterally unconfined tests based on time-temperature superposition procedures. 1.4 Ramp and Hold (R+H) tests may be completed in conjunction with SIM tests. They are designed to provide additional estimates of the initial rapid compressive creep strain levels appropriate for the SIM results. 1.5 This method can be used to establish the sustained load compressive creep characteristics of a geosynthetic that demonstrates a relationship between time-dependent behavior and temperature. Results of this method are to be used to augment results of compressive creep tests performed at 20 ± 1°C and may not be used as the sole basis for determination of long term compressive creep behavior of geosynthetic material. 1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.7.2014
Historická
1.7.2012
Historická
1.11.2007
Historická
1.7.2010
Historická
1.7.2013
Historická
1.10.2011
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.