Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM D7193-05
Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
Automaticky preložený názov:
Štandardné špecifikácie pre nesintrovaného pigmentované polytetrafluóretylénu ( PTFE ) Extrudovaný fóliou alebo páskou
NORMA vydaná dňa 1.7.2005
Informácie o norme:
Označenie normy: ASTM D7193-05
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.7.2005
Kód tovaru: NS-37822
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Anotácia textu normy ASTM D7193-05 :
Keywords:
apparent density, elongation, extruded, film, fluorocarbon film, pigmented, PTFE, PTFE tape, tape, tensile, thread seal tape, unsintered, ICS Number Code 83.140.10 (Films and sheets)
Doplňujúce informácie
| 1. Scope | ||||||||||||||||||||||||||||||
|
1.1 This specification covers unsintered, pigmented, extruded films or tapes manufactured from polytetrafluoroethylene, in nominal thicknesses from 0.025 mm (0.001 in.) to 0.51 mm (0.020 in.), that are >97 % virgin PTFE in composition prior to introducing pigments. 1.1.1 The use of recycled PTFE for production of unsintered extruded films or tapes has not been identified at this time. When commercial usable processes and materials are available, this specification will be revised to include recycled materials. 1.2 The values stated in SI units are detailed in IEEE/ASTM SI-10 are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1—Although this specification and ISO/DIS 13000-1 (1997) and ISO/DIS 13000-2 (1997) differ in approach or detail, data obtained relating to specific properties, using either are technically equivalent. Note 2—This specification is intended to be a complement to Specification D 6585, as the materials covered herein vary significantly enough due to their additives to warrant a stand-alone set of requirements. |
||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||
|
Doporučujeme:
