Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
Automaticky preložený názov:
Štandardné skúšobné metódy pre hodnotenie Side-lepenie potenciálu nátery na drevo
NORMA vydaná dňa 1.8.2014
Označenie normy: ASTM D6958-03(2014)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.8.2014
Kód tovaru: NS-37120
Počet strán: 10
Približná hmotnosť: 30 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
cohesive strength, elongation, gapping, panelization, shear strength, side-bonding, spread rate, tensile strength, ICS Number Code 79.080 (Semi-manufactures of timber)
Significance and Use | ||||||||||||||
4.1 This test method was originally designed as a means of quantitatively measuring the level of adhesion of the wood-wood interface caused by a wood coatings system applied to the substrate. The tensile test is useful in measuring bonding strength of coatings, such as gymnasium coatings, in which the wood strip flooring primarily expands or contracts in response to changes across the cross-sectional width of the strip floor. 4.2 This test method was further designed as a means of measuring the side-bonding potential of wood coating systems. |
||||||||||||||
1. Scope | ||||||||||||||
1.1 These test methods describe an evaluation procedure for the determination of undesirable side-bonding of coatings for wood flooring. They provide two mechanical properties tests for the quantitative determination of the cohesive strength of wood coatings (tensile and lap shear); they also provide a wood floor simulation test for the qualitative determination of side-bonding potential of wood coatings. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Historická
1.12.2009
Historická
1.12.2010
Historická
15.11.2011
Historická
1.4.2013
Historická
1.8.2010
Historická
1.11.2011
Posledná aktualizácia: 2024-09-15 (Počet položiek: 2 433 670)
© Copyright 2024 NORMSERVIS s.r.o.