Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Methods for Friction Tapes
Automaticky preložený názov:
Štandardné Skúšobné metódy pre trecie pásky
NORMA vydaná dňa 1.4.2012
Označenie normy: ASTM D69-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2012
Kód tovaru: NS-36935
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
adhesion, aged adhesion, breaking strength, dielectric breakdown voltage, dimensions, discoloration of copper, friction tape, parallelism, tackiness , Insulating tape, Length, Parallelism, Pinhole test, Rubber textile composites, Adhesion--electrical insulating materials, Adhesive tape (electrical insulating), Breaking strength/tenacity--electrical insulating materials, Copper, Dielectric breakdown voltage, Discoloration, Discoloration of copper, Electrical insulating tape, Friction tape
Significance and Use | ||||||||||||||||
In most applications, a friction tape must have adequate adhesion to remain in place and function properly. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 These test methods cover the methods and procedures for testing friction tapes. Such tapes consist of a woven fabric sheeting that has been impregnated with an adhesive insulating compound and cut into rolls of narrow width. These tapes are commonly used for protecting and binding in place, insulation applied to joints of electrical wires and cables, and for other mechanical purposes. Note 1—The material specifications formerly included in these test methods are now contained in Specification D4514. 1.2 The test methods included in this standard are as follows:
1.3 The values stated in inch-pound units are the standard. The SI units in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 2—There is no equivalent IEC standard. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Historická
1.11.2013
Historická
1.1.2012
Historická
1.11.2013
Historická
1.4.2012
Historická
1.11.2013
Historická
15.10.2012
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-21 (Počet položiek: 2 206 478)
© Copyright 2024 NORMSERVIS s.r.o.