Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
Automaticky preložený názov:
Štandardná testovacia metóda pre stanovenie kompresného odporu prepravných kontajnerov , komponenty , a kusovej
NORMA vydaná dňa 1.4.2015
Označenie normy: ASTM D642-15
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2015
Kód tovaru: NS-588513
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
compression, compression strength, corrugated boxes, dynamic load, fixed platen, floating platen, packaging, shipping containers, unit loads,, ICS Number Code 55.180.40 (Complete, filled transport packages)
Significance and Use | ||||||||||||||||||||||
4.1 Compressive resistance is one of the properties used to evaluate the ability of shipping containers, components, and unit loads to successfully survive the compressive forces they are subjected to during storage and distribution (see Note 1). Note 1: For constant load test refer to Test Method
D4577.
4.2 Compressive resistance may be determined with either fixed- or swiveled-platen-type testing machines. However, a fixed-head compression machine is required to perform edge-to-edge and corner-to-corner orientations on test specimens (see Note 2). Also, unit loads are generally tested only in the top-to-bottom orientation. Note 2: Fixed-platen machines generally cause corrugated box
specimens to fail at their strongest point, while swivel-platen
machines cause corrugated box specimens to fail at their weakest
point.1.1 This test method covers compression
tests on shipping containers (for example, boxes and drums) or
components, or both. Shipping containers may be tested with or
without contents. The procedure may be used for measuring the
ability of the container to resist external compressive loads
applied to its faces, to diagonally opposite edges, or to corners
(Fig. 1 and Fig. 2). This test method covers testing of multiple
containers or unit loads, in addition to individual shipping
containers, components, materials, or combination thereof.
1.2 The test method of applying load may be used to compare the characteristics of a given design of container with a standard, or to compare the characteristics of containers differing in construction. 1.3 This test method is related to TAPPI T804, which is similar for fixed platen machines but does not recognize swivel platen machines. This test method fulfills the requirements of International Organization for Standardization (ISO) Test Method 12048. The ISO standards may not meet the requirements for this test method. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-25 (Počet položiek: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.