Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus (Includes all amendments And changes 2/20/2017).
Automaticky preložený názov:
Štandardná skúšobná metóda pre strihovú stabilitu polymérnych obsahujúce tekutiny v európskej Diesel Injector Prístroje
NORMA vydaná dňa 1.11.2012
Označenie normy: ASTM D6278-12e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2012
Kód tovaru: NS-34494
Počet strán: 9
Približná hmotnosť: 27 g (0.06 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
diesel injector apparatus, mechanical shear stability, polymer containing fluid, viscosity loss, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||||
5.1 This test method evaluates the percent viscosity loss for polymer-containing fluids resulting from polymer degradation in the high shear nozzle device. Thermal or oxidative effects are minimized. 5.2 This test method is used for quality control purposes by manufacturers of polymeric lubricant additives and their customers. 5.3 This test method is not intended to predict viscosity loss in field service in different field equipment under widely varying operating conditions, which may cause lubricant viscosity to change due to thermal and oxidative changes as well as by the mechanical shearing of polymer. However, when the field service conditions, primarily or exclusively, result in the degradation of polymer by mechanical shearing, there may be a correlation between the results from this test method and results from the field. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the evaluation of the shear stability of polymer-containing fluids. The test method measures the percent viscosity loss at 100°C of polymer-containing fluids when evaluated by a diesel injector apparatus procedure that uses European diesel injector test equipment. The viscosity loss reflects polymer degradation due to shear at the nozzle. 1.2 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
|
|
Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils
|
|
Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
|
|
Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance (Includes all amendments and changes 12/12/2023).
|
|
Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles (Includes all amendments and changes 12/28/2022).
|
|
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
Historická
15.6.2013
Historická
1.5.2013
Historická
1.6.2014
Historická
15.9.2013
Historická
1.8.2007
Historická
15.4.2012
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.