ASTM D6589-05(2010)e..
ASTM D6670-13
ASTM D7035-10
ASTM D7049-04(2010)..
ASTM D7143-11
ASTM D7297-14
Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM D6209-13
Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
Automaticky preložený názov:
Štandardná skúšobná metóda pre stanovenie plynných a tuhých polycyklických aromatických uhľovodíkov v okolitom ovzduší (Collection sorbentu, podporou filtrov s plynovou chromatografiou / hmotnostnej spektrometrie v analýze)
NORMA vydaná dňa 1.4.2013
Informácie o norme:
Označenie normy: ASTM D6209-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2013
Kód tovaru: NS-34235
Počet strán: 14
Približná hmotnosť: 42 g (0.09 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM D6209-13 :
Keywords:
ambient atmospheres, analysis, gas chromatography-mass spectrometry, polycyclic aromatic hydrocarbons, PAH, ICS Number Code 13.040.20 (Ambient atmospheres)
Doplňujúce informácie
| Significance and Use | |||||
|
5.1 Polycyclic aromatic hydrocarbons (PAH) as defined by this test method are compounds made up of two or more fused aromatic rings. 5.2 Several PAH are considered to be probable human carcinogens. 5.3 PAH are emitted in the atmosphere primarily through wood or fossil fuel combustion. 5.4 Two- and three-ring PAH are typically present in urban air at concentrations ranging from 10 to several hundred nanograms per cubic metre (ng/m3); those with four or more rings are usually found at concentrations of a few ng/m3 or lower. 5.5 PAH span a broad spectrum of
vapor pressures (for example, from 1.1 × 10–2 kPa for
naphthalene to 2 × 10–13 kPa for coronene at 25°C).
Compound |
Formula |
Molecular |
Melting |
Boiling |
Vapor |
|
Naphthalene |
C10H8 |
128.18 |
80.2 |
218 |
1.1 × 10 –2 |
|
Acenaphthylene |
C12H8 |
152.20 |
92-93 |
265-280 |
3.9 × 10–3 |
|
Acenaphthene |
C12H10 |
154.20 |
90-96 |
278-279 |
2.1 × 10–2 |
|
Fluorene |
C13H10 |
166.23 |
116-118 |
293-295 |
8.7 × 10–5 |
|
9-Fluorenone |
C13H8O |
180.21 |
84 |
341.5 |
ca.10 –5 |
|
Anthracene |
C14H10 |
178.24 |
216-219 |
340 |
3.6 × 10 –6 |
|
Phenanthrene |
C14H10 |
178.24 |
96-101 |
339-340 |
2.3 × 10–5 |
|
Fluoranthene |
C16H10 |
202.26 |
107-111 |
375-393 |
6.5 × 10–7 |
|
Pyrene |
C16H10 |
202.26 |
150-156 |
360-404 |
3.1 × 10–6 |
|
Cyclopental[cd]pyrene |
C18H10 |
226.28 |
ca. 275? |
— |
ca. 10–7 |
|
Benz[a]anthracene |
C18H12 |
228.30 |
157-167 |
435 |
1.5 × 10–8 |
|
Chrysene |
C18H12 |
228.30 |
252-256 |
441-448 |
5.7 × 10–10 |
|
Retene |
C18H18 |
234.34 |
101 |
390 |
ca. 10–6 |
|
Benzo[b]fluoranthene |
C20H12 |
252.32 |
167-168 |
481 |
6.7 × 10–8 |
|
Benzo[k]fluoranthene |
C20H12 |
252.32 |
198-217 |
480-481 |
2.1 × 10–8 |
|
Perylene |
C20H12 |
252.32 |
273-278 |
500-503 |
7.0 × 10–10 |
|
Benzo[a]pyrene |
C20H12 |
252.32 |
177-179 |
493-496 |
7.3 × 10–10 |
|
Benzo[e]pyrene |
C20H12 |
252.32 |
178-179 |
493 |
7.4 × 10–10 |
|
Benzo[ghi]perylene |
C22H12 |
276.34 |
275.278 |
525 |
1.3 × 10–11 |
|
Indeno[1,2,3-cd]pyrene |
C22H12 |
276.34 |
162-163 |
— |
ca. 10–11 |
|
Dibenz[ah]anthracene |
C22H14 |
278.35 |
266-270 |
524 |
1.3 × 10–11 |
|
Coronene |
C24H12 |
300.36 |
438-440 |
525 |
2.0 × 10 –13 |
5.5.1 The distribution between
phases depends on ambient temperature, humidity, types and
concentrations of PAH and particulate matter, and residence time in
the air. PAH, especially those having vapor pressures above
10–8 kPa, may vaporize from particulate filters during
sampling. Consequently, a back-up vapor trap must be used for
efficient sampling.
5.6 Separate analyses of the filter and vapor trap will not reflect the original atmospheric phase distributions and should be discouraged.
1.1 This test method2 specifies sampling, cleanup, and analysis procedures for the determination of polycyclic aromatic hydrocarbons (PAH) in ambient air.
1.2 This test method is designed to collect both gas-phase and particulate-phase PAH and to determine them collectively.
1.3 This test method is a high-volume sampling (100 to 250 L/min) method capable of detecting PAH at sub-nanograms per cubic metre (ng/m3) concentrations with sampling volumes up to 350 m3 of air.
1.4 This test method has been validated for sampling periods up to 24 h.
1.5 Precision and bias under normal conditions can be expected to be ±35 to 50 %.
1.6 This test method describes a sampling and analysis procedure for PAH that involves collection from air on a combination fine-particle filter and sorbent trap and subsequent analysis by gas chromatography/mass spectrometry (GC/MS).
1.7 The range of this test method is approximately 0.05 to 1000 ng/m3 of air sampled.
1.8 The values stated in SI units shall be regarded as standard.
1.9 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for
Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision
Liquids Standard Specification for ASTM
Liquid-in-Glass Thermometers Standard Test Methods for Measuring
Surface Atmospheric Pressure Standard Practice for Planning the
Sampling of the Ambient Atmosphere Standard Terminology Relating to Sampling
and Analysis of Atmospheres (Includes all amendments and changes
9/7/2020).
