Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Molded Polyethylene Shipping and Storage Drums
NORMA vydaná dňa 1.9.2016
Označenie normy: ASTM D5998-16
Dátum vydania normy: 1.9.2016
Kód tovaru: NS-650876
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
This specification covers self-supporting, molded polyethylene, tight head drums for use in surface and air shipments. Drums shall be manufactured from virgin or recycled polyethylene plastics, and with handles and openings the number of which depends on the capacity of the drum. Safety seals and torque wrenches may also be provided as necessary. The drum shall be uniform in color and free of lumps, blisters, or flash, with the drum interior clean and free of foreign matter. Drop, leak proofness, hydrostatic pressure, stacking, handling, and capacity tests shall be performed and shall conform to the requirements specified. The drum shall also be examined to assess its conformance with the specified dimensions and capacity.
Keywords:
barrel, container, plastic container, polyethylene drum, recycled plastic,, ICS Number Code 55.140 (Barrels. Drums. Canisters), 83.080.20 (Thermoplastic materials)
1. Scope | ||||||||||||||
1.1 This specification covers self supporting, molded polyethylene, tight head drums designed for surface and air shipment, ranging in size from 5 gal (19 L) to and including 55 gal (208 L). 1.2 Virgin or recycled polyethylene plasticsNote 1: There is no known ISO equivalent to this standard. Note 2: This standard is intended to replace
MIL-D-43703C.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Posledná aktualizácia: 2024-05-07 (Počet položiek: 2 897 585)
© Copyright 2024 NORMSERVIS s.r.o.