Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
NORMA vydaná dňa 1.1.2021
Označenie normy: ASTM D5773-21
Dátum vydania normy: 1.1.2021
Kód tovaru: NS-1029186
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
automatic cloud point, cloud point, constant cooling rate, Peltier, petroleum products, thermoelectric, wax crystals,, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||||
5.1?The cloud point of petroleum products and biodiesel fuels is an index of the lowest temperature of their utility for certain applications. Wax crystals of sufficient quantity can plug filters used in some fuel systems. 5.2?Petroleum blending operations require a precise measurement of the cloud point. 5.3?This test method can determine the temperature of the test specimen at which wax crystals have formed sufficiently to be observed as a cloud with a resolution of 0.1 ?C. 5.4?This test method provides results that are equivalent to Test Method D2500. Note 1:?This is based on the Test Method D2500 equivalent cloud point in which the
0.1 ?C result is rounded to the next lower integer.
5.5?This test method determines the cloud point in a shorter period of time than Test Method D2500. Note 2:?In cases of samples with cloud points near ambient
temperatures, time savings may not be realized.
5.6?This test method eliminates most of the operator time required of Test Method D2500. 5.7?This test method does not require the use of a mechanical refrigeration apparatus. Note 3:?In certain cases of high ambient temperature, a source
of cooling water may be required to measure low-temperature cloud
points (see 7.1).
|
||||||||||
1. Scope | ||||||||||
1.1?This test method covers the determination of the cloud point of petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness by an automatic instrument using a constant cooling rate. 1.2?This test method covers the range of temperatures from ?60 ?C to +49 ?C with temperature resolution of 0.1 ?C, however, the range of temperatures included in the 1997 interlaboratory cooperative test program only covered the temperature range of 56 ?C to +34 ?C. 1.3?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||
2. Referenced Documents | ||||||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-03 (Počet položiek: 2 209 203)
© Copyright 2024 NORMSERVIS s.r.o.