Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
Automaticky preložený názov:
Štandardná skúšobná metóda pre častíc kontaminácie v leteckých palív laboratórnymi filtrácie
NORMA vydaná dňa 1.6.2012
Označenie normy: ASTM D5452-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.6.2012
Kód tovaru: NS-31257
Počet strán: 11
Približná hmotnosť: 33 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
aviation fuel, gravimetric contaminant, membrane color, membrane filter, particulate, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||||||||||||||
5.1 This test method provides a gravimetric measurement of the particulate matter present in a sample of aviation turbine fuel delivered to a laboratory for evaluation. The objective is to minimize these contaminants to avoid filter plugging and other operational problems. Although tolerable levels of particulate contaminants have not yet been established for all points in fuel distribution systems, the total contaminant measurement is normally of most interest. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This test method covers the gravimetric determination by filtration of particulate contaminant in a sample of aviation turbine fuel delivered to a laboratory. 1.1.1 The sample is filtered through a test membrane and a control membrane using vacuum. The mass change difference identifies the contaminant level per unit volume. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for Reagent
Water Standard Test Method for Flash Point by
Tag Closed Cup Tester Standard Test Methods for Flash Point by
Pensky-Martens Closed Cup Tester Standard Practice for Specifying Color by
the Munsell System Standard Guide for Generation and
Dissipation of Static Electricity in Petroleum Fuel Systems Standard Specification for Jet B Wide-Cut
Aviation Turbine Fuel Standard Practice for Aviation Fuel
Sample Containers for Tests Affected by Trace Contamination Standard Practice for Calculation of
Color Tolerances and Color Differences from Instrumentally Measured
Color Coordinates Standard Test Methods for Flash Point by
Small Scale Closed Cup Tester (Includes all amendments and changes
7/26/2021). Standard Test Method for Particulate
Contaminant in Aviation Fuel by Line Sampling |
Historická
1.5.2013
Historická
1.1.2011
Historická
1.6.2014
Historická
1.5.2013
Historická
1.5.2013
Historická
1.11.2012
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.