Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
NORMA vydaná dňa 1.7.2022
Označenie normy: ASTM D5002-22
Dátum vydania normy: 1.7.2022
Kód tovaru: NS-1070451
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
API gravity, crude oils, density, digital density analyzer, relative density,, ICS Number Code 75.040 (Crude petroleum)
Significance and Use | ||||||||||||||||
5.1?Density is a fundamental physical property that may be used in conjunction with other properties to characterize the quality of crude oils. 5.2?The density or relative density of crude oils is used for the conversion of measured volumes to volumes at the standard temperatures of 15 ?C or 60 ?F and for the conversion of crude mass measurements into volume units. 5.3?The application of the density result obtained from this test method, for fiscal or custody transfer accounting calculations, may require measurements of the water and sediment contents obtained on similar specimens of the crude oil parcel. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1?This test method covers the determination of the density, relative density, and API gravity of crude oils that may be handled in a normal fashion as liquids at test temperatures between 15 ?C and 35 ?C utilizing either manual or automated sample injection equipment. This test method applies to crude oils with high vapor pressures provided appropriate precautions are taken to prevent vapor loss during transfer of the sample to the density analyzer. 1.2?This test method was evaluated in interlaboratory study testing using crude oils in the 0.75 g/mL to 0.95 g/mL range. Lighter crude oil may require special handling to prevent vapor losses. 1.3?The values stated in SI units are to be regarded as standard. Other units of measurement are included in this standard. The accepted units of measurement of density are grams per millilitre and kilograms per cubic metre. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.