Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM D4802-15
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
Automaticky preložený názov:
Standard Specification pre poly (METYLMETAKRYLÁT) Akrylát plastovou fóliou
NORMA vydaná dňa 15.12.2015
Informácie o norme:
Označenie normy: ASTM D4802-15
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.12.2015
Kód tovaru: NS-625231
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM D4802-15 :
Keywords:
acrylic, acrylic sheet, plastic, plastic sheet, PMMA, poly(methyl methacrylate), recycled material, transparent plastic, sheet,, ICS Number Code 83.140.10 (Films and sheets)
Doplňujúce informácie
| 1. Scope | ||||||||||||||||||||||||||||||||
|
1.1 This specification covers monolithic methacrylate sheets produced by various processes. For this specification, methacrylate sheet shall be composed of polymerized acrylic monomers of which at least 80 % shall be methyl methacrylate. Note 1: This specification is intended to consolidate the
requirements of the Cast Methacrylate Plastic Sheets portion of
discontinued Fed. Spec. L-P-391D, discontinued Specification
D702. Cast Methacrylate
Plastic Sheets, Rods, Tubes and Shapes, and discontinued
Specification D1547, Extruded
Acrylic Plastic Sheet.
1.2 This specification is intended to cover acrylic sheet for general-purpose applications. For specialty applications consult the appropriate use standards. 1.3 The following safety hazards caveat pertains only to the test methods portion, Section 8, of this specification: 1.4 Acrylic sheet is used frequently in applications in which extreme clarity, lack of optical distortion and absence of any foreign particulate matter are of primary significance. Reground material is suitable for use as long as careful control is used to eliminate adverse effects on these properties. The use of recycled material in type B-1 and B-2 sheet, is not suitable for use when these properties are adversely affected. The use of recycled or reground material is not possible for type A-1 and A-2 materials since the sheet is produced directly from monomer Note 2: This standard and ISO 7823-1 address the same subject
matter, but differ in technical content.
|
||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||
|
Doporučujeme:
