Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
NORMA vydaná dňa 15.11.2022
Označenie normy: ASTM D4532-22
Dátum vydania normy: 15.11.2022
Kód tovaru: NS-1099199
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
air sampling, cyclone, respirable dust, workplace atmospheres,, ICS Number Code 13.040.99 (Other standards related to air quality)
Significance and Use | ||||||||||||||||||||||||||||
5.1?This test method covers the determination of respirable dust concentration in workplace atmospheres. 5.2?Variations of the test method are in world-wide use for determining compliance relative to occupational exposure levels. 5.3?The test method may be used to verify dust control measures. 5.4?The test method may also be applied in research into health effects of dust in an occupational setting. |
||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||
1.1?This test method provides details for the determination of respirable dust concentration defined in terms of international convention in a range from 0.5 mg/m3 to 10 mg/m3 in workplace atmospheres, depending on sampling time. Specifics are given for sampling and analysis using any one of a number of commercially available cyclone samplers. 1.2?The limitations on the test method are a minimum weight of 0.1 mg of dust on the filter, and a maximum loading dependent on sampler type and time of sampling. The test method may be used at higher loadings if the flow rate can be maintained constant. 1.3?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4?This test method contains notes that are explanatory and are not part of the mandatory requirements of the method. 1.5?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-01 (Počet položiek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.