Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
Automaticky preložený názov:
Štandardná skúšobná metóda pre tvárniteľnosti zinkový základné / Chromate Komplexné nátery na oceľ
NORMA vydaná dňa 1.6.2010
Označenie normy: ASTM D4146-10
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.6.2010
Kód tovaru: NS-26216
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
chromate complex, coil coating, zinc-rich primer, Adhesion--paints/related coatings/materials, Chromate coatings, Deformation--paints/related coatings/materials, Formability testing, Primers, Visual examination--paints/related coatings/materials, Zinc-rich primer/chromate complex coatings, ICS Number Code 87.040 (Paints and varnishes)
Significance and Use | ||||
The results of the combined deformation and tape test are related to the ability of the coated metal to withstand stamping in factory applications. This test can be used to control the manufacturing process or in development work to improve the product. It should be recognized that variability in the results persist due to the test conditions and forming machine variations. |
||||
1. Scope | ||||
1.1 This test method covers the evaluation of the formability and adhesion of factory applied zinc-rich primer/chromate complex coatings on steel with thicknesses of 0.65 to 1.25 mm (0.025 to 0.05 in.) typical of those used in the coil coating industry. 1.2 The degree of oil removal prior to forming, the techniques of taping, and differences in adhesive strength of the tape can affect the adhesion rating. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see Section 7. |
||||
2. Referenced Documents | ||||
|
Historická
1.6.2009
Historická
15.3.2013
Historická
1.1.2014
Historická
1.11.2008
Historická
15.5.2010
Historická
1.6.2011
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.