Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Pressboard for Electrical Insulating Purposes
Automaticky preložený názov:
Štandardné špecifikácie pre lepenka na izolačné účely elektrické
NORMA vydaná dňa 1.10.2009
Označenie normy: ASTM D4063-99(2009)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2009
Kód tovaru: NS-25903
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
ash, board, calendered, chlorides, compressibility, cotton, density, dielectric strength, kraft, moisture, precompressed, pressboard, shrinkage, tensile strength, thickness, Compressibility, Cotton, Dielectric applications, Electrical insulating materials--specifications, Electrical insulating paper/paperboard--specifications, Electrical insulating solids--specifications, Fuller board, Kraft electrical insulating paper/paperboard, Paperboard--specifications, Precompressed board
1. Scope | ||||||||
1.1 This specification covers pressboard for electrical insulating purposes, manufactured from kraft, cotton, or kraft and cotton pulps. This board is intended for dielectrical or structural purposes in transformers and other electrical apparatus. 1.2 Electrical insulating boards are most commonly referred to (and will be referred to herein) as pressboard. Other terms used for pressboard include transformer board, fuller board, and presspan. 1.3 This specification covers pressboard having a nominal thickness of 0.030 to 0.315 in. (0.8 to 8.0 mm). For thinner material refer to Specification D1305. 1.4 The maximum thickness available will differ with the type and the manufacturer. The maximum sheet size will differ with the thickness, type, and manufacturer. 1.5 Pressboard shall normally be plied wet without pasting. Unless specified by the purchaser, this specification does not include pressboard comprised of two or more sheets that have been laminated together using an adhesive. Note 1—The materials described in this specification are similar to corresponding types of pressboard described in IEC Specification 641-3, Sheet 1, Types B.0.1, B.2.1, B.2.3, B.3.1, and B.3.3. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. |
||||||||
2. Referenced Documents | ||||||||
|
Historická
1.5.2013
Historická
1.4.2014
Historická
1.10.2006
Historická
1.10.2009
Historická
1.11.2012
Historická
1.3.2013
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.