Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Finished Woven Glass Fabrics
Automaticky preložený názov:
Štandardné špecifikácie pre Finished Woven sklenené tkaniny
NORMA vydaná dňa 15.1.2009
Označenie normy: ASTM D4029-09
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.1.2009
Kód tovaru: NS-25780
Počet strán: 16
Približná hmotnosť: 48 g (0.11 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
appearance, construction, fabric weave, glass fabrics, laminates, organic content, plastics, twist, yarn number, yarns, Appearance of textile materials/applications, Construction--textile fabrics/fibers, Fabric weave, Glass--specifications, Glass-fiber-reinforced (GRP) plastics--specifications, Laminates (plastic), Organic matter content--textiles, Plastics--textile applications, Textile fabrics/fibers--specifications, Twist--textiles, Woven glass (for plastic laminates), Yarn number, Yarns
1. Scope | ||||||||||||||||||||||||||||||||||||||||||
1.1 This specification covers finished fabrics woven from “E” electrical glass fiber yarns that are intended as a reinforcing material in laminated plastics for structural use. This specification can also be applied to fabrics made of other glass types as agreed upon between the purchaser and the supplier. 1.2 This specification specifies the terminology, definitions, general requirements, and physical requirements for finished woven glass fabrics This specification permits the application of sizing materials to the glass fiber yarn during manufacture that helps facilitate weaving. These organic materials are typically removed from the greige fabric and replaced with a finish that is compatible with the resin matrix specified in the contracting document Note 1—Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure they need not be compatible with the subsequent resin matrix. 1.3 This specification shows values in both SI units and in inch-pound units. “SI units” is the technically correct name for the system of metric units known as the International System of Units.“ Inch-pound units” is the technically correct name for the customary units used in the United States. The values in SI units are provided as information only; the values stated in inch-pound units are to be regarded as standard. 1.4 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth, and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates. 1.5 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include greige glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||
|
Posledná aktualizácia: 2024-11-01 (Počet položiek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.