ASTM D4000-13

D2951-00

Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking (Withdrawn 2006)

D3895-19

Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

D3915-06

Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Withdrawn 2015)

D495-22

Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation

D569-90

Method for Measuring the Flow Properties of Thermoplastic Molding Materials (Withdrawn 1995)

D570-22

Standard Test Method for Water Absorption of Plastics

D573-04(2019)

Standard Test Method for Rubber´Deterioration in an Air Oven

D575-91(2018)

Standard Test Methods for Rubber Properties in Compression

D618-21

Standard Practice for Conditioning Plastics for Testing

D624-00(2020)

Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

D635-22

Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

D638-22

Standard Test Method for Tensile Properties of Plastics

D648-18

Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

D695-23

Standard Test Method for Compressive Properties of Rigid Plastics

D1248-16

Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

D1430-22

Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

D1434-23

Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting

D1435-20

Standard Practice for Outdoor Weathering of Plastics

D1499-13(2021)

Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

D1505-18

Standard Test Method for Density of Plastics by the Density-Gradient Technique

D149-20

Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

D150-22

Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation

D256-23e1

Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (Includes all amendments and changes 4/7/2023).

D257-14(2021)e1

Standard Test Methods for DC Resistance or Conductance of Insulating Materials (Includes all amendments and changes 5/6/2021).

D395-18

Standard Test Methods for Rubber Property´Compression Set

D412-16(2021)

Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

D471-16a(2021)

Standard Test Method for Rubber Property—Effect of Liquids (Includes all amendments and changes 6/25/2021).

D706-20

Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)

D747-10

Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019)

D785-23

Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D787-18

Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

D788-16

Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

D707-15(2023)

Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)

D789-19

Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions

D790-17

Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D792-20

Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

D883-24

Standard Terminology Relating to Plastics

D955-21

Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

D1003-21

Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

D1149-18

Standard Test Methods for Rubber Deterioration´Cracking in an Ozone Controlled Environment

D1203-23

Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods

D1238-23a

Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer (Includes all amendments and changes 12/6/2023).

D1525-17e1

Standard Test Method for Vicat Softening Temperature of Plastics (Includes all amendments and changes 9/15/2017).

D1562-22

Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)

D1600-18

Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)

D1693-21

Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

D1784-20

Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D1822-21

Standard Test Method for Determining the Tensile-Impact Resistance of Plastics

D1929-23

Standard Test Method for Determining Ignition Temperature of Plastics

D4329-21

Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

D3965-21

Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

Department of Transportation

Federal Motor Vehicle Safety Standard No. 302

F372-99

Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique

D5857-17(2024)

Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

D5927-17

Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

D5990-20a

Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK) (Includes all amendments and changes 9/10/2020).

D6314-98

Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials (Withdrawn 2002)

D6338-17

Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods

D4895-18(2023)

Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

D4976-12a(2020)

Standard Specification for Polyethylene Plastics Molding and Extrusion Materials (Includes all amendments and changes 11/17/2022).

D4745-19

Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

D4986-22

Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

D5021-00

Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007)

D5046-98

Standard Specification for Fully Crosslinked Elastomeric Alloys (FCEAs) (Withdrawn 2000)

D5048-20a

Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame (Includes all amendments and changes 9/11/2020).

D5132-20

Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

D5138-23

Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

D5203-07

Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources (Withdrawn 2016)

D5204-22

Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials

D5205-16

Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials

D5279-21

Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion

D5336-22

Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials

D4396-22

Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications

D4474-00

Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)

D4549-15(2021)

Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

D4617-03

Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012)

D4634-16(2022)

Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

D4673-23

Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

D4364-13(2022)e1

Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight (Includes all amendments and changes 2/25/2022).

D5476-99

Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)

D5575-18(2023)

Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

D5593-99e1

Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)

D5628-18

Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

D5630-22

Standard Test Method for Ash Content in Plastics

D5676-99

Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004)

D4349-22

Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

D4804-23

Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

D4812-19e1

Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics (Includes all amendments and changes 5/3/2022).

D4894-19

Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

D2116-16(2021)

Standard Specification for FEP Resin Molding and Extrusion Materials

D2137-11(2018)

Standard Test Methods for Rubber Property´Brittleness Point of Flexible Polymers and Coated Fabrics

D2240-15(2021)

Standard Test Method for Rubber Property—Durometer Hardness

D2287-19

Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

D2288-97(2001)

Standard Test Method for Weight Loss of Plasticizers on Heating (Withdrawn 2010)

D2565-23

Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

D2583-13

Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

D2584-18

Standard Test Method for Ignition Loss of Cured Reinforced Resins

D2632-15(2019)

Standard Test Method for Rubber Property´Resilience by Vertical Rebound

D2843-22

Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

D2863-23

Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

D3012-19

Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

D3159-22

Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials

D3222-21

Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

D3275-18(2023)

Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

D3307-21

Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials

D3350-21

Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

D3418-21

Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

D3638-21e1

Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials (Includes all amendments and changes 2/2/2022).

D3713-95

Standard Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame (Withdrawn 2000)

D3763-23

Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

D3801-20a

Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position (Includes all amendments and changes 9/11/2020).

D3892-15(2020)

Standard Practice for Packaging/Packing of Plastics

D5420-21

Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

D4507-93a

Specification for Thermoplastic Polyester (TPES) Materials (Withdrawn 1999)

D6339-11(2019)

Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

D6358-19e1

Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods (Includes all amendments and changes 7/24/2019).

D6360-15(2021)

Standard Practice for Enclosed Carbon-Arc Exposures of Plastics

D6394-21a

Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) (Includes all amendments and changes 5/13/2021).

D6778-20

Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

D6779-23

Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

D6835-23

Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

D6869-17

Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

D7209-06

Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015)

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E84-23d

Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).

E96/E96M-23

Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials

E104-20a

Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions (Includes all amendments and changes 12/21/2020).

E119-22

Standard Test Methods for Fire Tests of Building Construction and Materials

E162-22

Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

E662-21ae1

Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials (Includes all amendments and changes 9/16/2021).

E1354-23

Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

D3985-17

Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor

D4020-18

Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

D3935-21

Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material

D4066-13(2019)

Standard Classification System for Nylon Injection and Extrusion Materials (PA)

D4067-23

Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

D4101-24

Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials

D4181-00

Standard Classification for Acetal (POM) Molding and Extrusion Materials (Withdrawn 2005)

D4203-17

Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

D4216-22

Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds