Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption (Withdrawn 2018)
Automaticky preložený názov:
Štandardná skúšobná metóda pre stopové prvky v uhlia a koksu Ash atómovou absorpciou
NORMA vydaná dňa 1.4.2011
Označenie normy: ASTM D3683-11
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2011
Kód tovaru: NS-24471
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
coal, coal ash, coke ash, trace elements, atomic absorption spectroscopy, Ash--coal/coke, Beryllium content, Chromium content, Coal ash, Coke ash, Copper content--coal/coke, Lead content, Manganese content, Nickel content--coal/coke, Spectrophotometry--atomic absorption, Vanadium content, Zinc content--coal/coke, ICS Number Code 75.160.10 (Solid fuels)
Significance and Use | ||||||||||||||||
Many trace elements occur in coal, primarily as a part of the mineral matter but may also be associated with the organic matrix. Concern over release of certain trace elements to the environment as a result of coal utilization has made the determination of these elements an increasingly important aspect of coal analysis. When coal ash is prepared in accordance with this test method, the eight elements listed in 1.1 are quantitatively retained in the ash and are representative of concentrations in the coal. Concentrations of these and other elements in power plant ash, industrial process ash, fly ash, and so forth, may or may not be representative of total quantities in the coal. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This test method describes a procedure for the determination of beryllium, chromium, copper, manganese, nickel, lead, vanadium, and zinc in coal ash or coke ash. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3 The values stated in SI units () should be regarded as the standard. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Historická
1.10.2007
Historická
1.5.2009
Historická
1.10.2013
Historická
1.4.2011
Historická
15.4.2012
Historická
1.7.2010
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.