Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
Automaticky preložený názov:
Štandardná skúšobná metóda pre stanovenie krútiaceho momentu Sila ultrafialového žiarenia (UV) svetlom tuhnúce sklo / Metal lepených spojov
NORMA vydaná dňa 1.4.2008
Označenie normy: ASTM D3658-01(2008)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2008
Kód tovaru: NS-24365
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
adhesive, glass, light-cured, metal, torque, ultraviolet, Joints (adhesives), Adhesive joints--exposure, Radiation exposure--adhesives, Torque--adhesives, ICS Number Code 83.180 (Adhesives)
Significance and Use | ||||||||||||||||
This test method provides reasonably accurate information with regard to the ability of UV curing adhesives to withstand torsional shearing forces. It may be used to determine the effect of environment on torsional shear strength. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This test method covers the simplistic comparison of strengths of glass/metal joints when the adhesive is cured by ultraviolet (UV) radiation and standard specimens are used and tested under specified conditions of preparation, radiation, and load. 1.2 This test method involves torque loading UV-bonded hexagonal metal blocks to glass plates. 1.3 This test method may be used to obtain comparative torque strength-to-failure data for other bonded joint systems, radiation cured or not. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Historická
1.7.2013
Historická
1.10.2013
Historická
1.10.2012
Historická
1.10.2012
Historická
1.10.2013
Historická
1.12.2011
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.