Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM D3401-97(2017)
Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
NORMA vydaná dňa 1.11.2017
Informácie o norme:
Označenie normy: ASTM D3401-97(2017)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2017
Kód tovaru: NS-802778
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM D3401-97(2017) :
Keywords:
coulometric Karl Fischer titration, halogenated organic solvents, Karl Fischer test method´water content, moisture content, solvents, volumetric Karl Fischer titration, water content,, ICS Number Code 71.080.20 (Halogenated hydrocarbons)
Doplňujúce informácie
| Significance and Use | ||
|
4.1 High water concentrations can have a detrimental effect on many uses of halogenated solvents. 4.1.1 Water can cause corrosion and spotting when solvents are used for metal cleaning. 4.1.2 Water can reduce the shelf life of aerosol formulations. 4.1.3 Water can inhibit desired reactions when solvents are used in formulations. |
||
| 1. Scope | ||
|
1.1 These test methods describe the use of the Karl Fischer (KF) titration for determination of water in halogenated organic solvents and mixtures thereof. Water concentrations from 2 to 1000 ppm can be determined in these solvents. Two test methods are covered as follows: 1.1.1 Test Method A, Water Determination Using a Coulometric KF Titrator—The coulometric test method is known for its high degree of sensitivity (typically < 10 μg H2O) and should be the test method of choice if water concentrations are typically below 50 ppm or if only small amounts of sample are available for water determinations. This test method requires the use of equipment specifically designed for coulometric titrations. 1.1.2 Test Method B, Water Determination Using a Volumetric KF Titrator—The volumetric test method is a more traditional approach to KF water determinations. Although titrators are specifically designed for KF volumetric determinations, many automatic titrators on the market can be adapted to perform KF titrations. 1.2 Either of these test methods can be used to determine typical water concentrations (15 to 500 ppm) found in halogenated solvents. 1.3 These test methods recommend the use of commercially available Karl Fischer titrators and reagents. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||
| 2. Referenced Documents | ||
|
Doporučujeme:
