Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
Automaticky preložený názov:
Štandardná skúšobná metóda pre stopové množstvo síry v tekutý ropných uhľovodíkov oxidatívny mikrocoulometria
NORMA vydaná dňa 1.5.2014
Označenie normy: ASTM D3120-08(2014)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.5.2014
Kód tovaru: NS-22535
Počet strán: 10
Približná hmotnosť: 30 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
light hydrocarbons, microcoulometry, sulfur, ICS Number Code 75.080 (Petroleum products in general)
Significance and Use | ||||||||||||||||||||
4.1 This test method is used to determine the concentration of sulfur in light liquid hydrocarbons, gasoline, and diesels and their additives, where such concentrations of sulfur can be detrimental to their production, performance, and use. The measurement of sulfur in the production and final product of gasoline and diesel is required for both regulatory purposes and to ensure maximum life expectancy of catalytic converters used in the automotive industry. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This test method covers the determination of sulfur concentration in the range from 3.0 to 1000 mg/kg in light liquid hydrocarbons and fuels with oxygenates boiling in the range from 26 to 274°C (80 to 525°F). Note 1: Preliminary data has shown that this test method is
also applicable to the determination of sulfur in denatured fuel
ethanol (Specification D4806), automotive spark ignition engine
fuel (Specification D4814),
Ed75–Ed85 (Specification D5798) or gasoline-oxygenate fuel blends
with greater than 10% ethanol. However, the precision for these
materials has not been determined. Subcommittee D02.03 is
undertaking activities to obtain precision statements for these
materials.
1.2 Other materials falling within the distillation range specified in 1.1, but having sulfur concentrations above 1000 mg/kg, may be tested using appropriate dilutions to bring them within the specified limit. In addition, sample types that may be outside the specified distillation range, such as diesels and biodiesels, may be analyzed by this test method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. The preferred units are milligrams per kilogram (mg/kg). 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.For specific hazard statements, see Sections 7 – 9. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Historická
15.4.2012
Historická
1.5.2010
Historická
1.12.2012
Historická
1.5.2010
Historická
1.5.2014
Historická
1.5.2014
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.