Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM D2880-14

Standard Specification for Gas Turbine Fuel Oils

Automaticky preložený názov:

Štandardné špecifikácie pre plynové turbíny vykurovacích olejov

NORMA vydaná dňa 1.8.2014

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 76.30 € Tlačené - 76.30 €
Dostupnosť	SKLADOM
Cena	76.30 € bez DPH
76.30 €

Informácie o norme:

Označenie normy: ASTM D2880-14
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.8.2014
Kód tovaru: NS-21816
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Anotácia textu normy ASTM D2880-14 :

Keywords:

fuel oils, gas turbine, petroleum and petroleum products, ICS Number Code 75.160.20 (Liquid fuels)

Doplňujúce informácie

1. Scope

1.1 This specification covers the selection of fuels for gas turbines, excepting gas turbines used in aircraft, for the guidance of interested parties such as turbine manufacturers and the suppliers and purchasers of fuel oils. The specification sets forth the properties of fuels at the time and place of custody transfer to the user.

1.2 Three appendixes are provided for informational purposes only and do not constitute a requirement of this specification unless mutually agreed upon between the interested parties.

1.2.1 Appendix X1 describes the five grades of gas turbine fuels covered by this specification. Further, it states the significance of various test methods used in inspecting the fuels.

1.2.2 Appendix X2 discusses the sources of fuel contaminants and notes the significance of such contaminants in the operation of gas turbines and gas turbine fuel systems. The particular significance of trace metals in gas turbine fuels is noted. Upper limits of trace metals are recommended for the various grades of gas turbine fuels, but these recommended limits do not constitute a requirement of the specification unless mutually agreed upon by the interested parties. Limitations due to the use of used or recycled oil are also noted.

Note 1: The gas turbine operator should consult Practice D4418 for methods of ensuring fuels of adequate cleanliness and for guidance on long-term storage of distillate fuels and on liquids from non-petroleum sources as gas turbine.

Note 2: Nothing in this specification shall preclude observance of federal, state, or local regulations which may be more restrictive.

Note 3: The generation and dissipation of static electricity can create problems in the handling of distillate gas turbine fuel oils. For more information on the subject, see Guide D4865.

2. Referenced Documents

D3605-22	Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
D3828-16a(2021)	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester (Includes all amendments and changes 7/26/2021).
D2709-22	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D2622-21	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
40	CFR Part 80 Regulation of Fuels and Fuel Additives
26	CFR Part 48 Diesel Fuel Excise Tax; Dye Color and Concentration
D7346-15(2021)	Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
D7220-22	Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
D7094-23	Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
D7042-21a	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) (Includes all amendments and changes 12/14/2021).
D6728-16(2021)	Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
D93-20	Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D86-23ae1	Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 2/9/2024).
D56-22	Standard Test Method for Flash Point by Tag Closed Cup Tester
D97-17b(2022)	Standard Test Method for Pour Point of Petroleum Products (Includes all amendments and changes 11/29/2022).
D1298-12b(2017)e1	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Includes all amendments and changes 3/14/2023).
D1266-18	Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
D975-23a	Standard Specification for Diesel Fuel (Includes all amendments and changes 12/19/2023).
D524-15(2019)	Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
D482-19	Standard Test Method for Ash from Petroleum Products
D445-23	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4294-21	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
D4418-22	Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
D4865-23	Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
D5453-19a	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence (Includes all amendments and changes 8/13/2019).
D5949-16(2022)	Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
D5950-14(2020)	Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
D5985-02(2020)	Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
D6469-20	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
D1552-23	Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
D1796-22	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
D129-18	Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
D396-21	Standard Specification for Fuel Oils

Odporúčame:

EviZak - všetky zákony vrátane ich evidencie na jednom mieste

Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !

Chcete vedieť viac informácii ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.