Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Biodegradability of Alkylbenzene Sulfonates
Automaticky preložený názov:
Štandardná skúšobná metóda pre biologickej rozložiteľnosti alkylbenzénsulfonát
NORMA vydaná dňa 10.10.1995
Označenie normy: ASTM D2667-95(2001)
Poznámka: NEPLATNÁ
Dátum vydania normy: 10.10.1995
Kód tovaru: NS-21093
Počet strán: 11
Približná hmotnosť: 33 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
alkylbenzene sulfonate, biodegradability, confirming test, presumptive test, semicontinuous activated sludge, shake culture, ICS Number Code 71.100.40 (Surface active agents)
Significance and Use | ||||||
This test method is designed to determine whether the sulfonate tested will be removed sufficiently by usual methods of sewage treatment for the effluent to be safely discharged to the environment without further treatment. If the surfactant reduction in the presumptive test equals or exceeds 90 %, the material is considered to be adequately biodegradable without further testing. If the surfactant reduction in the presumptive test is between 80 and 90 %, the material should be subjected to the confirming test. If the surfactant reduction in the presumptive test is below 80 %, the material is considered inadequately biodegradable. If it is necessary to run the confirming test, the surfactant reduction in this test must be at least 90 % for the material to be considered adequately biodegradable. An example of data from both the presumptive and confirming test can be found in Appendix X4. PRESUMPTIVE TEST (SHAKE CULTURE)Top
|
||||||
1. Scope | ||||||
1.1 This test method covers the determination of the degree of biodegradability of alkylbenzene sulfonates. It serves as an index of the suitability of the sulfonate for general use as a surfactant. 1.2 In general, this test method distinguishes between sulfonates in which the alkyl side chains are linear and those in which they are branched, since the former are more readily biodegradable. If the alkylbenzene sulfonate in fully formulated products is to be examined, it must be extracted using the method noted in Annex A1. (See Appendix X1 for data.) 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Material Safety Data Sheets are available for reagents and materials. Review them for hazards prior to usage. |
||||||
2. Referenced Documents | ||||||
|
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.