Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM D2513-99

Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings

Automaticky preložený názov:

Štandardné špecifikácie pre termoplastov tlak plynu potrubia , hadice, a kovania

NORMA vydaná dňa 10.5.1999

Jazyk
Prevedenie	Online zabezpečené PDF - 83.40 € Tlačené - 83.40 €
Dostupnosť	SKLADOM
Cena	83.40 € bez DPH
83.40 €

Informácie o norme:

Označenie normy: ASTM D2513-99
Poznámka: NEPLATNÁ
Dátum vydania normy: 10.5.1999
Kód tovaru: NS-20628
Počet strán: 19
Približná hmotnosť: 57 g (0.13 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Doplňujúce informácie

1. Scope

1.1 This specification covers requirements and test methods for material (see Appendix X1) dimensions and tolerances, hydrostatic burst strength, chemical resistance, and impact resistance of plastic pipe, tubing, and fittings for use in fuel gas mains and services for direct burial and reliner applications. The annexes provide specific requirements and test methods for each of the materials currently approved. If and when additional materials are available, specific annex requirements will be added. The pipe and fittings covered by this specification are intended for use in the distribution of natural gas. Requirements for the qualifying of polyethylene systems for use with liquefied petroleum gas are covered in Annex A1.

1.1.1 This specification does not cover threaded pipe. Design considerations are discussed in Appendix X2. In-plant quality control programs are specified in Annex A3 and Annex A4.

1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.

1.4 The following is an index of the annexes and appendixes in this specification:

Annex	Subject
A1	Polyethylene (PE) Pipe and Fittings
A2	Poly (Vinyl Chloride) (PVC) Pipe and Fittings

A3	In-Plant Quality Control for all materials up to 12 in.
A4	In-Plant Quality Control for PE materials between 14 and 24 in.
A5	Polyamide (PA) Pipe and Fittings

Appendixes	Subject
X1	New Materials
X2	Design Consideration

1.5 The following precautionary caveat pertains only to the test method portion, Section 6, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D638-22	Standard Test Method for Tensile Properties of Plastics
D1238-23a	Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer (Includes all amendments and changes 12/6/2023).
D1598-24	Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D1599-18(2024)	Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D2122-22	Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D2837-25	Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
F1473-24a	Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins (Includes all amendments and changes 1/3/2025).
F2620-24	Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
G155-25	Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
D2683-26	Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
F2897-23a	Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances) (Includes all amendments and changes 11/3/2023).
B?16.40	Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
B? 31.8	Gas Transmission and Distribution Piping Systems
D3350-25	Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
F1055-16a(2022)	Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing (Includes all amendments and changes 11/8/2022).
F1563-23	Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
F2138-12(2024)	Standard Specification for Excess Flow Valves for Natural Gas Service
F2619/F2619M-20	Standard Specification for High-Density Polyethylene (PE) Line Pipe
D1898-68(1989)	Standard Practice for Sampling of Plastics (Withdrawn 1998)
D3261-24	Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
D2290-25	Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
D2774-25	Standard Practice for Underground Installation of Thermoplastic Pressure Piping
D2565-23	Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
D618-21	Standard Practice for Conditioning Plastics for Testing
D543-21	Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D1435-20	Standard Practice for Outdoor Weathering of Plastics
D1600-18	Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)
F412-25a	Standard Terminology Relating to Plastic Piping Systems (Includes all amendments and changes 10/8/2025).

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.