Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM D245-22
Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
NORMA vydaná dňa 1.2.2022
Informácie o norme:
Označenie normy: ASTM D245-22
Dátum vydania normy: 1.2.2022
Kód tovaru: NS-1050996
Počet strán: 17
Približná hmotnosť: 51 g (0.11 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM D245-22 :
Keywords:
lumber, solid sawn structural lumber, structural grades, visually graded, wood,, ICS Number Code 79.040 (Wood, sawlogs and sawn timber)
Doplňujúce informácie
| Significance and Use | ||||||||||||||||
|
3.1?Need for Lumber Grading:? 3.1.1?Individual pieces of lumber, as they come from the saw, represent a wide range in quality and appearance with respect to freedom from knots, cross grain, shakes, and other characteristics. Such random pieces likewise represent a wide range in strength, utility, serviceability, and value. One of the obvious requirements for the orderly marketing of lumber is the establishment of grades that permit the procurement of any required quality of lumber in any desired quantity. Maximum economy of material is obtained when the range of quality-determining characteristics in a grade is limited and all pieces are utilized to their full potential. Many of the grades are established on the basis of appearance and physical characteristics of the piece, but without regard for mechanical properties. Other grades, called structural or stress grades, are established on the basis of features that relate to mechanical properties. The latter designate near-minimum strength and near-average stiffness properties on which to base structural design. 3.1.2?The development of this practice is based on extensive research covering tests of small clear specimens and of full-sized structural members. Detailed studies have included the strength and variability of clear wood, and the effect on strength from various factors such as density, knots (See Terminology D9), and other defects, seasoning, duration of stress, and temperature. 3.2?How Visual Grading is AccomplishedVisual grading is accomplished from an examination of all four faces and the ends of the piece, in which the location as well as the size and nature of the knots and other features appearing on the surfaces are evaluated over the entire length. Basic principles of structural grading have been established that permit the evaluation of any piece of stress-graded lumber in terms of a strength ratio for each property being evaluated. The strength ratio of stress-graded lumber is the hypothetical ratio of the strength property being considered compared to that for the material with no strength-reducing characteristic. Thus a piece of stress-graded lumber with a strength ratio of 75 % in bending would be expected to have 75 % of the bending strength of the clear piece. In effect, the strength ratio system of visual structural grading is thus designed to permit practically unlimited choice in establishing grades of any desired quality to best meet production and utilization requirements. 3.3?Classification of Stress-Graded Lumber:? 3.3.1?The various factors affecting strength, such as knots, deviations of grain, shakes, and checks, differ in their effect, depending on the kind of loading and stress to which the piece is subjected. Stress-graded lumber is often classified according to its size and use. Four classes are widely used, as follows: 3.3.1.1?Dimension LumberPieces of rectangular cross section, from nominal 2 to 4 in. thick and 2 or more in. wide, graded primarily for strength in bending edgewise or flatwise, but also frequently used where tensile or compressive strength is important. Dimension lumber covers many sizes and end uses. Lumber graded for specific end uses may dictate a special emphasis in grading and require an identifying grade name. Note 1:?For example, in North American grading under the
American Lumber Standards Committee, stress graded dimension lumber
categories that reflect end use include Light Framing, Structural
Light Framing, Structural Joists and Planks, and Studs.
3.3.1.2?Beams and StringersPieces of rectangular cross section, 5 in. nominal and thicker, nominal width more than 2 in. greater than nominal thickness, graded for strength in bending when loaded on the narrow face. 3.3.1.3?Posts and TimbersPieces of square or nearly square cross section, 5 by 5 in., nominal dimensions and larger, nominal width not more than 2 in. greater than nominal thickness, graded primarily for use as posts or columns. 3.3.1.4?Stress-Rated BoardsLumber less than 2 in. nominal in thickness and 2 in. or wider nominal width, graded primarily for mechanical properties. 3.3.2?The assignment of names indicating the uses for the various classes of stress-graded lumber does not preclude their use for other purposes. For example, posts and timbers may give service as beams. The principles of stress grading permit the assignment of any kind of allowable properties to any of the classes of stress-graded lumber, whether graded primarily for that property or not. Recommendations for allowable properties may include all properties for all grades or use classes. While such universal application may result in loss of efficiency in some particulars, it offers the advantage of a more simple system of grades of stress-graded lumber. 3.4?Essential Elements in a Stress-Grade Description:? 3.4.1?A stress grade formulated by this practice contains the following essential elements: 3.4.2?A grade name that identifies the use-class as described in 3.3. 3.4.3?A description of permissible growth characteristics that affect mechanical properties. Characteristics that do not affect mechanical properties may also be included. 3.4.4?One or more allowable properties for the grade related to its strength ratio. |
||||||||||||||||
| 1. Scope | ||||||||||||||||
|
1.1?This practice 1.2?The grading provisions used as illustrations herein are not intended to establish grades for purchase, but rather to show how stress-grading principles are applied. Detailed grading rules for commercial stress grades which serve as purchase specifications are established and published by agencies which formulate and maintain such rules and operate inspection facilities covering the various species. 1.3?The material covered in this practice appears in the following order:
1.4?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||
|
Odporúčame:
EviZak - všetky zákony vrátane ich evidencie na jednom mieste
Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !
Chcete vedieť viac informácii ? Pozrite sa na túto stránku.
