Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Classification System for Rubber Products in Automotive Applications
Automaticky preložený názov:
Štandardný systém klasifikácie gumových výrobkov v automobilovom priemysle
NORMA vydaná dňa 1.1.2012
Označenie normy: ASTM D2000-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.1.2012
Kód tovaru: NS-18999
Počet strán: 53
Približná hmotnosť: 159 g (0.35 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
automotive applications, elastomer, rubber, Accelerated aging/testing--rubber/related materials, Automotive rubber, Classification (standards)--rubber, Line call-out, Natural rubber (NR), Oil resistance--electrical insulating materials, Rubber aging, Vehicles (automotive), ICS Number Code 83.060 (Rubber), 83.160.01 (Tyres in general)
1. Scope | ||||||||||||||||||||||||||||||||||||||||||
1.1 This classification system covers the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. Note 1—This classification system may serve many of the needs of other industries in much the same manner as SAE numbered steels. It must be remembered, however, that this system is subject to revision when required by automotive needs. It is recommended that the latest revision always be used. 1.2 This classification system is based on the premise that the properties of all rubber products can be arranged into characteristic material designations. These designations are determined by types, based on resistance to heat aging, and classes, based on resistance to swelling in oil. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the quality of all elastomeric materials. 1.3 In all cases where the provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. Note 2—When the rubber product is to be used for purposes where the requirements are too specific to be completely prescribed by this classification system, it is necessary for the purchaser to consult the supplier in advance, to establish the appropriate properties, test methods, and specification test limits. 1.4 The values stated in SI units are to be regarded as standard. |
||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||
|
Historická
1.1.2011
Historická
1.12.2010
Historická
1.6.2014
Historická
1.5.2012
Historická
1.6.2014
Historická
15.11.2013
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.