Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25°C (Withdrawn 2004)
Automaticky preložený názov:
Štandardná skúšobná metóda pre špecifická hmotnosť Fermež , Lak, živice, a súvisiacich materiáloch pri 25/25 ° C ( Uzavretý 2004 )
NORMA vydaná dňa 1.1.1996
Označenie normy: ASTM D1963-85(1996)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.1.1996
Kód tovaru: NS-18854
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
Alkyds/alkyd resins, Fatty acids-tests, Oils-drying, Resins-alkyd, specific gravity at 25/25°C, test,, Specific gravity-paints/related coatings/materials, drying oils, varnishes, alkyd resins, fatty acids, and related, materials, at 25/25C, test,, Varnishes, specific gravity at 25/25C, test, ICS Number Code 87.060.20 (Binders)
1. Scope |
1.1 This test method covers the determination of the specific gravity of drying oils, varnishes, alkyd resins, fatty acids, and related materials. 1.2 This test method is recommended where precision is required in the determination of specific gravity, such as establishing specifications or referee work. 1.2.1 For materials with a kinematic viscosity of 40 stokes or less, use the Leach type pycnometer. 1.2.2 For materials with a viscosity in excess of 40 stokes, use the Hubbard-type pycnometer. 1.2.3 For materials that are solid or semisolid at 25°C but liquid at slightly higher temperatures, use the Hubbard-type pycnometer. Note 1-The weight per gallon cup method is satisfactory for most routine laboratory work although the precision does not equal that of the pycnometer method. The test method described herein for use with the Hubbard-type pycnometer is applicable to the weight per gallon cup method, or Test Method D1475 may be used. Note 2-Hydrometers also provide a rapid method for checking specific gravity and are generally satisfactory for routine control work. However, the precision of the hydrometer method is not adequate where accurate results are required. Test Method D1298 covers the use of the hydrometer in the determination of specific gravity. Most ASTM Hydrometers (See Specification E100) are calibrated to read specific gravity at 15.5/15.5°C (60/60°F). Information on sources of hydrometers calibrated at 25/25°C is available at ASTM Headquarters.1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. >For specific hazard statements, see Section 6. |
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.