Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes (Includes all amendments And changes 1/7/2016).
Automaticky preložený názov:
Štandardné praktiky pre tenkostenných trubiek Odber vzoriek zemín na účely geotechnických
NORMA vydaná dňa 15.5.2012
Označenie normy: ASTM D1587-08(2012)e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.5.2012
Kód tovaru: NS-17773
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
geologic investigations, intact, sampling, soil exploration, soil investigations, subsurface investigations, ICS Number Code 93.020 (Earth works. Excavations. Foundation construction. Underground works)
Significance and Use | |||
5.1 This practice, or Practice D3550 with thin wall shoe, is used when it is necessary to obtain a relatively intact specimen suitable for laboratory tests of engineering properties or other tests that might be influenced by soil disturbance. Outside diameter (Do):
|
|
|
|
in. |
2 |
3 |
5 |
Wall thickness: |
|
|
|
Bwg |
18 |
16 |
11 |
in. |
0.049 |
0.065 |
0.120 |
mm |
1.24 |
1.65 |
3.05 |
Tube length: |
|
|
|
in. |
36 |
36 |
54 |
Inside clearance ratio, % |
<1 |
<1 |
<1 |
1.3 This practice is often used in conjunction with fluid rotary drilling (D1452, D5783) or hollow-stem augers (D6151). Subsurface geotechnical explorations should be reported in accordance with practice (D5434). This practice discusses some aspects of sample preservation after the sampling event. For information on preservation and transportation process of soil samples, consult Practice D4220. This practice does not address environmental sampling; consult D6169 and D6232 for information on sampling for environmental investigations.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4.1 The tubing tolerances presented in
Nominal Tube Diameters from Table 2A Tolerances
Size Outside
Diameter
2
in.
50.8
mm
3
in.
76.2
mm
5
in.
127
mm
Outside diameter, Do
+0.007
+0.179
+0.010
+0.254
+0.015
0.381
-0.000
-0.000
-0.000
-0.000
-0.000
-0.000
Inside diameter, Di
+0.000
+0.000
+0.000
+0.000
+0.000
+0.000
-0.007
-0.179
-0.010
-0.254
-0.015
-0.381
Wall thickness
±0.007
±0.179
±0.010
±0.254
±0.015
±0.381
Ovality
0.015
0.381
0.020
0.508
0.030
0.762
Straightness
0.030/ft
2.50/m
0.030/ft
2.50/m
0.030/ft
2.50/m
1.6 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
|
Standard Practice for Description and Identification of Soils (Visual-Manual Procedures) (Includes all amendments and changes 4/4/2018). |
|
Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils |
|
Standard Practice for Soil Exploration and Sampling by Auger Borings |
|
Standard Terminology Relating to Soil, Rock, and Contained Fluids |
|
Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
|
Standard Practices for Preserving and Transporting Soil Samples |
|
Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
|
Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
|
Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
|
Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling |
|
Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021) |
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.